Master Mode
Object Utilities
11-13
the order in which MIDI commands are sent, it may affect the performance of the K2600 under
some circumstances.
Restarting the K2600 or performing a soft reset disables Guitar/Wind Controller mode.
Object Utilities
Object Utility functions are useful for moving or copying objects into various banks, naming or
renaming objects, deleting objects, and dumping objects over MIDI. To access these functions,
press the Object soft button while in Master mode. You will see the following dialog:
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
Select|database|function:|||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|Move|||Copy|||Name||Delete|Dump|||Done|
The soft buttons are used to choose the various object utility functions.
Move Move selected objects to a new bank or a speciÞc starting ID.
Copy Copy selected objects to a new bank or a speciÞc starting ID.
Name Name selected objects.
Delete Delete selected objects.
Dump Dump selected objects over MIDI.
Done Exit from the object utilities.
Each functionÕs multiple object selection interface is identical to the one used in the Save Objects
dialog. For a complete description of this interface, see Saving Individual Objects on page 13-26.
Here is what the Move page would look like (with several objects selected):
Func:MOVE|||||Sel:14/211|||||Index:|||1|
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
Sample||200*Zild|20|Ride|Hrd|C|4S|||260K
Sample||201*Zild|20|Ride|Sft|C|4S|||224K
Sample||202*Zild|16|Crash||||C|4S|||341K
Sample||203*Zild|NewBeatOpen|C|4S|||198K
Select||Next|||Type||Multi|||OK|||Cancel
The name of the function is displayed on the top line:
Func:MOVE|
To Next Page
Loading...
Need help?
General
