K2600 Version 4 (GM Mode) User’s Guide
Enabling GM Mode from the Master page
3
Enabling GM Mode from the Master page
In the V4.0 K2600 operating system, the first Master page (MAST1) now has a
GM
soft button:
Master|||GM|Samples:8192K|||Memory:485K|
Tune||||||:
0ct||||||||||||||||||||||||||
Transpose|:0ST||||||||||||||||||||||||||
KB3Chan|||:1||||||||||||||||||||||||||||
VelTouch||:1|Linear|||||||||||||||||||||
PressTouch:1|Linear|||||Confirm||:On||||
Intonation:1|Equal||||||IntonaKey:C|||||
Object|
Delete|
|Util||
Sample|
||GM|||
MAST2
Press the
GM
soft button to call up the new GM page:
Master:GM|||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
GM||||||||:
On|||||||||||||||||||||||||||
GM|Studio|:500|GM1|Room|||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|||||||||||||||||||||||||||||||||||
MAST1
Enable GM Mode by setting the GM parameter to On. When GM is on,
GM
is displayed on the top line of the
screen. This happens on all of the K2600’s main pages.
The GM Studio parameter sets the FX Studio that will be used by GM programs. Six GM Studios are included,
providing different reverb and chorus-plus-reverb settings.
500 GM1 Room
501 GM2 Chamber
502 GM3 Hall
503 GM4 Chorus+Room
504 GM5 Chorus+Chmbr
505 GM6 Chorus+Hall
The default GM Studio (GM1 Room) is at ID 500. Use the GM Studio parameter to select a Studio which best com-
plements your program material.
The
View
soft button (formerly on the Mast1 page) is now on the MAST2 page.
Master2||GM|Samples:8192K|||Memory:485K|
||||||||||||||||||||||||||||||||||||||||
Vocoder|||:
Off|||
|||||||||||||||||||||||
View|Mode|:List|||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||
||||||||||||||||||||||||||||||||||
Reset|
|||||||||||||||||||||||||||||
MAST1