6
Rear Panel GETTING STARTED GUIDE
2. Rear Panel
Power Button DC Jack USB Port
SD Card Slot Monitor Out
Main Out Audio Ins
MIDI Ports Pedals Headphone Out
You can turn the power on or off by pressing the POWER button.
Power Button
Connect the power adapter to the DC power Jack.
DC Power Jack
The MIDI ports are used to communicate with external MIDI modules and controllers. The OUT port
transmits data and the IN port receives data.
To use the SP7 Grand as a MIDI controller to trigger other MIDI devices or sound modules, use a
MIDI cable to connect the SP7 Grand's MIDI OUT port to the MIDI IN port of the module you want to
control.
If you want to use an external MIDI controller or device to control the SP7 Grand, use a MIDI cable to
connect the SP7 Grand's MIDI IN port to the MIDI OUT port of the external controller or device you
want to use.
MIDI IN/OUT Ports
You can connect the SP7 Grand to your computer via USB to perform the following functions:
- Stream stereo audio between the SP7 Grand and a DAW.
- Use the SP7 Grand as a MIDI controller to play software instruments on your computer/tablet.
- Play and control the SP7 Grand with an external USB MIDI controller.
- Update the engine firmware of SP7 Grand.
USB Port
To Next Page
Loading...
