EasyManua.ls Logo

Kushlan KPRO350MP User Manual

Kushlan KPRO350MP
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Kushlan Products, LLC
10601 S. Sam Houston Parkway W. STE 140
Houston, TX 77071
www.kushlanproducts.com
Features Include:
Portable pedestal mixer
Can transport concrete in the
upright position
Can dump load in any position
Handles can be placed in front
dump or back dump
28 Drum rotations per minute
Combination mixing blades will mix
concrete and mortar
1/2 ‐HP capacitor start, high torque
brushless electric motor with gear
box
Heavy gauge steel tubing frame
Removable handles for ease of
transport and storage
10”flat free polyurethane foam
wheels
(DO NOT USE THIS MIXER FOR QUICK
DRYING CEMENT, EPOXY CEMENT OR
FLOOR LEVELING COMPOUNDS!)
Question and Answer IconNeed help?

Do you have a question about the Kushlan KPRO350MP and is the answer not in the manual?

Kushlan KPRO350MP Specifications

General IconGeneral
BrandKushlan
ModelKPRO350MP
CategoryConstruction Equipment
LanguageEnglish

Summary

Set-up and Operating Assistance

Safety Alert

Personal Safety

Personal safety is involved. Pay extra attention; failure may lead to injury or damage.

Warnings and Safety Instructions

Failure to read/follow these warnings and instructions may lead to serious personal injury.

General Warnings

Safety Instructions

Mixer Instructions

Lubrication

Apply EP grease to all fittings until it comes out of the bearings. Lubricate all fittings before each use.

Gearbox Motor

Change gearbox oil every 200 hours. Fill with 4 oz of 75w-90 gear oil.

General Checks

Check all screws for tightness before each use.

Mixing Guidelines

Avoid sharp objects in drum. Do not use for quick dry cement, epoxy, or floor leveling compounds.

Cleaning Instructions

Avoid spraying water on the motor. Thorough cleaning after each use is recommended for service life.

KPRO350MP Parts List

Gearbox and Motor Assembly Diagram

Gearbox and Motor Assembly Parts List

Assembly Guidance

Attaching Swivel Bracket

Pull back the latch on the swivel bracket, slide it over the lower main frame, and secure with the latch.

Attaching Flanged Bushing

Install the bushing to the drum's back, then tighten the inside nuts to secure it.

Locking Drum for Transport

Setting Mixer in Dump Position

Limited Warranty Policy