Need help?Do you have a question about the Kustom DE300 HD and is the answer not in the manual?
General| Brand | Kustom |
|---|---|
| Model | DE300 HD |
| Category | Musical Instrument Amplifier |
| Language | English |
1/4-inch input jack for passive instruments and general use.
1/4-inch input jack for active or high-output instruments.
Adjusts preamp gain for clean to overdriven tube amp tones.
Passive EQ control for adjusting low frequencies.
Passive EQ control for adjusting mid-range frequencies.
Passive EQ control for adjusting high frequencies.
Shapes low frequencies to minimize room boominess.
Shapes high frequencies to reduce harshness or control horn.
Adjusts overall amplifier volume with Organic Clipping™ feature.
Light indicates when the amplifier is powered on.
AC power switch to turn the amplifier On or Off.
1/4-inch jacks for connecting speakers, rated 300W at 4 Ohms minimum.
Line level input to power amp; breaks preamp signal path.
Line level output from preamp; does not break signal path.
Input jack for returning signal from external processors.
Output jack for sending signal to external processors.
Engages signal conditioning for cabinet emulation on line out.
Selects Balanced Line Out signal path before or after EQ.
XLR output for connecting to mixers or line level devices.
Active output for connecting to a tuner or similar device.
Port for connecting the AC power cord for storage and replacement.
Details fuse access and replacement procedures.
Specifies the preamp tube model used.
Details RMS power output at various impedance levels.
Lists impedance for dual inputs at different settings.
Provides gain setting information and its impact.
Indicates the typical signal-to-noise performance.
Defines the nature of the direct output connection.
Specifies frequency ranges and cut/boost for tone and EQ controls.
Lists voltage and frequency requirements for global use.
Gives product size and weight in metric and imperial units.
To Next Page
