Kustom KPM4100 User Manual

OWNER'S MANUAL
KPM4100
FEATURES AT A GLANCE:
· 100 Watts RMS
· 9 Total inputs including 4 Balanced microphone inputs
· 4 high impedance microphone inputs and a Tape/CD input
· All inputs may be used simultaneously
· Built in Effects with individual control on each channel
· Line Out for connection to external amplifiers
· Record Out jack for taping performances
· RF interference protection on all inputs and outputs
Congratulations on the purchase of your new Kustom amp! Your new KPM4100 Powered mixer
successfully draws on more than 30 years of amplifier design and manufacturing experience at
Kustom. This amp was planned from the ground up by our engineers to offer top-notch tone and
dependable performance. Inside this manual, you'll find handy information about the amp's features.
We wish you many years of enjoyment with your Kustom KPM4100 Powered Mixer.

Kustom KPM4100 Specifications

General

Brand	Kustom
Model	KPM4100
Category	Music Mixer
Language	English

Summary

General Safety Precautions

Important Safety Instructions

Comprehensive list of safety and operating instructions for product use.

Input Section Features

3 Pin Low Impedance Microphone Input

Balanced microphone input with phantom power and 1K ohm impedance.

1/4" Line High Impedance Input

For line level devices, electric guitar, bass, or keyboard, 10K ohms impedance.

Volume Control

Controls the volume level for each channel, acts as a preamp.

Tone Control

Adjusts overall tone of individual inputs (+/- 15 dB).

Effects Control

Controls the amount of effects added to input signals.

Master Section Controls

Master Volume

Controls the overall volume level of the entire amplifier.

Master Effects

Controls the level of internal effects added back to the mix.

Tape Volume

Controls the level of playback inputs (RCA jacks).

Master EQ Section

Five slide controls to tailor the overall sound frequencies.

Back Panel Connections

Speaker Out

1/4" speaker outputs rated at 8 ohm minimum impedance.

Line Out

1/4" 2-conductor line level output for external amplifiers or recording.

Tape Record (L/R)

RCA jacks for hooking up a tape deck to record from the mixer.

Tape Play (L/R)

RCA jacks for playing a tape deck, CD player or other line level source.

AC Inlet/Fuse

Standard IEC inlet for AC power with fuse housing.

Power Switch

Switches the unit on or off, indicated by a front panel LED.

Signal Flow Diagram

EC Declaration of Conformity

Technical Specifications