To Next PageTo Next Page
Need help?Do you have a question about the Kutai electronics EA16 and is the answer not in the manual?
General| Brand | Kutai electronics |
|---|---|
| Model | EA16 |
| Category | Controller |
| Language | English |
Details voltage and frequency input parameters and selection.
Specifies voltage and current ratings for power input.
Outlines voltage, current, and resistance specifications for the output.
Defines the acceptable voltage regulation tolerance.
Describes the minimum residual voltage required for build-up.
Specifies the rate of change in AVR ambient temperature.
Explains compensation based on load current and PF.
Details input voltage range and accuracy.
Specifies max output DCV and time limit for protection.
Describes adjustment range using a trimmer.
States the maximum power consumed by the unit.
Covers frequency protection settings.
Defines the duration of the soft start phase.
Provides the physical dimensions of the AVR.
Specifies the weight of the AVR.
Terminal details for power input.
Terminal details for maximum output current.
Terminal details for voltage sensing.
Terminal details for load compensation (Droop).
Terminal details for external voltage adjustment.
Terminal details for analogue voltage input.
Configuration settings via DIP switches.
Description of indicator lights (U/F, O/E).
Adjusting output voltage with external bias.
Function and selection for voltage droop.
Stabilizing output voltage oscillations.
Setting the generator output voltage.
Setting and function of under-frequency protection.
Guidelines for professional installation.
Operational considerations and warnings.
Steps to establish residual magnetism for voltage build-up.
Troubleshooting steps for voltage build-up issues.
Troubleshooting steps for low output voltage.
Troubleshooting steps for high output voltage.
Troubleshooting steps for unstable output voltage.
