To Next PageTo Next PageWhy is my KUULAIRE Air Conditioner not cooling?
If your KUULAIRE Air Conditioner isn't cooling, first ensure the water level is adequate and that the pump is activated by pressing the COOL button. Also, check if the COOL icon is flashing, which indicates low or no water; if so, refill the tank. If the pump is damaged, consider replacing it.
How to fix a KUULAIRE Air Conditioner that won't turn on?
If your KUULAIRE Air Conditioner isn't turning on, ensure the cord is properly plugged in and try turning the unit on using both the control panel and the remote control. Check the circuit breaker or GFCI reset button. Also, verify that the water tank is correctly assembled and locked.
What to do if my KUULAIRE KA45 Air Conditioner unit will not respond?
If your KUULAIRE Air Conditioner unit won't respond to commands, start by checking the remote control batteries. If neither the control panel nor the remote works, the PCB board might be damaged and require replacement. Also, moisture in the PCB could be the problem. In this case, turn off the unit and unplug it from the power, then drain, clean, and dry the unit, replacing the cooling pad if necessary, and refill with fresh water.
Why does my KUULAIRE Air Conditioner leak water?
If water droplets are coming out of the air outlet of your KUULAIRE Air Conditioner, it could be due to calcium-saturated water. Drain the water, perform a deep clean, and clean the cooling pad. Alternatively, the cooling pad may be clogged and need replacement.
Why does my KUULAIRE KA45 smell?
If your KUULAIRE Air Conditioner is emitting an odor, and it's a brand new unit, the cooling pad might be the source. This odor should dissipate within a week of initial use. However, if the unit is not new, algae might be the problem. In this case, replace the pad and maintain it regularly.
Crucial safety guidelines to prevent damage and injury during operation.
Identifies the KA45 model and its regional variants.
Overview of the evaporative cooler's features and technology.
Instructions for setting up the unit, noting no assembly is required.
Labeled diagram and identification of all unit parts.
How to use power, fan speed, cooling, timer, and swing features.
Explanation of the low water sensor and its protective function.
Instructions for using the remote control for unit functions.
Guidance on filling and draining the water tank safely.
Methods for cleaning the unit exterior and interior.
Detailed steps for deep cleaning and component removal.
Technical details including voltage, current, and power.
Solutions for common problems and operational errors.
A list of available replacement parts with corresponding part numbers.
General| Brand | KUULAIRE |
|---|---|
| Model | KA45 |
| Category | Air Conditioner |
| Language | English |
