_________________________________________________________________
S T A B I T U R N T A B L E 2 KUZMA
CONTENTS
I. GENERAL DESCRIPTION 3
SPECIFICATIONS 4
ACCESSORIES 4
II. UNPACKING 6
III. ASSEMBLY 7
1. Oil in Suspension Reservoirs 7
2. Oil in Bearing and Insertion of Subplatter 9
3. Belt 9
4. Platter 10
5. Connecting Power Supply Unit 12
6. Testing 13
7. Mounting of Tonearm 14
IV. ADJUSTMENT 17
1. Positioning Turntable and Power Supply 17
2. Connections 18
3. Levelling Turntable 18
4. Levelling Platter 18
5. Testing 18
6. Fine Speed Adjustment 20
V. USE OF CLAMP 22
VI. GENERAL MAINTAINANCE 23
1. Cleaning of Woodwork 23
2. Cleaning Pulley and Belt 23
3. Tightening Screws on Armboard 23
4. Check Oil in Bearing 24
VII. MINOR PROBLEMS 25
A. Immobile Subchassis 25
B. Platter does not Rotate 25
C. Noisy Belt 25
D. Cleaning of mat 25
E. Slow Start 26
F. Movement of Subchassis while Platter is Rotating 27
G. Sensitivity to Mechanical Feedback and Shock 28
VIII. TRANSPORT AND PACKING 29
To Next Page
Loading...
