The Hydra Super Cleaning Pro+ 9.0L is a professional pressure sprayer designed for various cleaning and maintenance tasks, particularly in construction and industrial settings. It is manufactured by KWAZAR CORPORATION Sp. z o.o.
Function Description
The Hydra Super Cleaning Pro+ 9.0L is a versatile pressure sprayer primarily used for applying liquids under pressure. Its main function is to facilitate cleaning and maintenance work, especially in environments where robust and efficient application of cleaning agents, water, or other liquids is required.
It is ideal for professional cleaning and drilling in hard construction materials such as stone, brick, concrete, and reinforced concrete. The sprayer can also be used for the purpose of watering and spraying plants, as well as for washing construction equipment and machinery, tools, scaffolding, and cleaning surfaces after plastering work, washing surfaces at heights, and wherever access to water is difficult. The device is equipped with NBR and FPM sealing elements, ensuring durability and resistance to various chemicals.
The device is designed to be used with a quick coupling and a STOP valve, allowing for controlled and efficient operation. It includes a flexible hose, a suction pipe, a plastic bag containing a container with silicone oil, a water nozzle, and a shoulder strap for ease of use and transport.
Important Technical Specifications
- Model: Hydra Super 9.0L
- Dimensions (length x width x height): 230 x 280 x 680 mm
- Nominal capacity: 9.0 liters
- Maximum capacity: 11.4 liters
- Net weight of the device: 2.5 kg
- Operating pressure (max): 3.4 bar
- Water nozzle capacity at a given pressure:
- 3.6 l/min (9 l in approx. 150 seconds)
- 3.6 l/min (9 l in approx. 180 seconds)
- Straight jet:
- 3.6 l/min (9 l in approx. 150 seconds)
- 3.6 l/min (9 l in approx. 180 seconds)
- Conical jet:
- 3.0 l/min (9 l in approx. 180 seconds)
- 3.0 l/min (9 l in approx. 210 seconds)
- Maximum temperature of the working liquid: 30°C
- Sealing elements: NBR and FPM
Usage Features
The Hydra Super Cleaning Pro+ 9.0L is designed for ease of use and safety.
Installation:
- Do not unscrew the head from the tank.
- Install the shoulder strap and adjust its length as necessary.
Preparation for Operation:
- Before each use, check the correct operation of the safety valve.
- Fill the tank with water to its nominal capacity.
- Always de-pressurize the tank before unscrewing the pump.
- To de-pressurize, pull the head of the safety valve and keep it pulled for at least 10 seconds until pressure has been completely released.
Working with the Device:
- Unscrew the pump from the head by turning the piston rod in the cylinder holders anticlockwise.
- To lock the piston rod, turn it clockwise.
- Insert the strainer into the head socket and pour in the working liquid.
- Remove the sieve from the head socket.
- Screw the pump into the head.
- To ensure proper sealing, the piston rod can be used as a handle for transport.
- The device is ready for connecting to a drilling rig or for spraying.
- Use the supplied water nozzle, if needed, to sprinkle or spray over a larger area.
- Ensure the nozzle is closed before connecting it to the hose; hold the body of the nozzle and turn its casing anticlockwise until it is locked.
- If closed, press the nozzle into the quick coupling until a "clicking" sound is heard. The flow of liquid is regulated by turning the casing of the nozzle. This allows for variable adjustment ranges from a conical jet to a straight jet.
- After disconnecting the nozzle from the hose, the STOP valve inside the quick coupling will automatically cut off the flow of liquid through the hose. The pressure in the tank will be maintained. The pressure level in the tank will gradually decrease during operation, restoring the pressure in the tank by pumping.
- After finishing work, it is absolutely necessary to de-pressurize the tank.
- To transport the device, use the shoulder strap or the piston rod's handle, the latter of which must be locked in-between the cylinder handles. The pump must be tightly screwed into the head, regardless of the applied method of transport.
Safety Warnings:
- It is strictly forbidden to leave the unattended or store the unit if it is under pressure.
- It is forbidden to store the working liquid in the tank.
- This is a pressurized device and must be protected against impacts.
- The maximum temperature of the liquid cannot exceed 30°C.
- It is forbidden to unscrew the head from the tank.
- Do not unscrew the head from the tank. This can be a source of danger to health and life.
- This device cannot be used by the following people: minors, pregnant women, intoxicated persons, or people under the influence of substances that limit the capacity to concentrate.
- It is forbidden to work with the device if it is malfunctioning, its safety valve is faulty, and/or there is a leak.
- Eating, drinking, and smoking tobacco or e-cigarettes is not permitted when working with harmful substances.
- Protect your eyes (glasses), respiratory tract (mask), and skin (protective clothing, headgear, gloves, and shoes) when working or preparing to commence work.
- It is forbidden to use explosive, corrosive, or flammable agents.
- When working with chemical substances in confined spaces, have at least two people to accompany you.
- After finishing work, empty the device and wash with clean water.
- The tank of the device is not intended for storing the working liquid.
- Keep the device, its accessories, packaging, and chemical agents out of the reach of children.
- If not suitable for further use, clean the device and return it to a waste disposal facility.
- Only use the pump supplied with the unit to generate pressure in the tank.
- When renting the device, make sure it is always in good working order and attach these operating instructions.
- It is recommended to change the device to a new one after 5 years of purchase, taking into account the fact that this device comes in contact with chemical agents, its exposition to atmospheric factors, and the ageing process.
Maintenance Features
Storage and Maintenance:
- After each use, rinse the device thoroughly with clean water.
- De-pressurize the tank.
- Pull the head of the safety valve.
- Unscrew the pump from the head.
- Pour clean water (approx. 1/4 of the tank's capacity) into the tank.
- Screw in the pump.
- To obtain a tight connection, and then pump the tank.
- Re-spray the previously sprayed areas to flush the system of the device.
- When done, de-pressurize the tank.
- Using the safety valve, screw the pump out.
- Drain the remaining water from the tank.
- Store the device WITHOUT PRESSURE at a temperature from +5°C to +35°C in locations not exposed to sunlight, away from radiators and out of the reach of children. It is recommended to unscrew the pump from the head.
- If the device will be out of operation for a longer period of time, some maintenance is required. To this end, remove any residual agent from the device, rinse it with clean water, and then lubricate the seals with silicone oil (supplied with the device).
- In addition, all movable components and seals must be periodically lubricated with silicone oil. This applies in particular to the seals indicated by the arrows in the figure.
Troubleshooting:
Before commencing any repair work, always de-pressurize the tank.
| Symptom | Cause | Remedy |
| --- | --- |
| Function: | Pressure sprayer for professional cleaning. |
| Features: | * Capacity: 9.0 liters.
- Pressure: Operates at a maximum pressure of 3.4 bar.
- Nozzle: Equipped with a versatile nozzle that can switch between a straight jet and a conical jet.
- Seals: Features NBR and FPM seals for enhanced durability and chemical resistance.
- Safety Valve: Includes a safety valve to release pressure before opening the tank.
- Shoulder Strap: Comes with a shoulder strap for comfortable transport.
- Quick Coupling: Allows for quick and secure attachment of the nozzle.
- STOP Valve: Enables immediate shut-off of liquid flow.
- Ergonomic Design: Designed for professional use with a focus on user comfort and efficiency.
- Material Compatibility: Suitable for various cleaning agents, water, and other liquids used in construction and industrial applications. |
| Technical Specifications: | * Model: Hydra Super 9.0L
- Dimensions (L x W x H): 230 x 280 x 680 mm
- Nominal Capacity: 9.0 liters
- Maximum Capacity: 11.4 liters
- Net Weight: 2.5 kg
- Max Operating Pressure: 3.4 bar
- Water Nozzle Capacity (at 3.4 bar):
- Straight jet: 3.6 l/min (9 liters in approx. 150-180 seconds)
- Conical jet: 3.0 l/min (9 liters in approx. 180-210 seconds)
- Max Liquid Temperature: 30°C
- Seal Material: NBR and FPM |
| Usage Features: | * Easy Filling: Tank can be filled to its nominal capacity after releasing pressure.
- Pressure Release: Always de-pressurize the tank by pulling the safety valve for at least 10 seconds before opening.
- Nozzle Adjustment: Easily switch between straight and conical spray patterns by turning the nozzle casing.
- Controlled Flow: The STOP valve allows for immediate cessation of liquid flow.
- Transport: Can be carried using the shoulder strap or the pump's piston rod, which locks into place for secure handling.
- Chemical Compatibility: Designed to handle various cleaning agents, making it suitable for diverse professional applications.
- Professional Use: Ideal for construction sites, industrial cleaning, and maintenance tasks involving hard materials like stone, brick, and concrete.
- Plant Care: Can also be used for watering and spraying plants.
- Equipment Cleaning: Effective for washing construction equipment, machinery, tools, and scaffolding. |
| Maintenance Features: | * Thorough Rinsing: After each use, the device must be thoroughly rinsed with clean water.
- Pressure Release for Storage: Always de-pressurize the tank before storing.
- Lubrication: Periodically lubricate all movable components and seals with silicone oil (supplied with the device) to ensure smooth operation and longevity.
- Storage Conditions: Store without pressure, at temperatures between +5°C and +35°C, away from direct sunlight and heat sources.
- Long-Term Storage: For extended periods of inactivity, remove any residual agent, rinse with clean water, and lubricate the seals.
- Troubleshooting: Before any repair, always de-pressurize the tank. Common issues like pressure drop, leaks, or a non-opening safety valve have specific remedies involving seal inspection, lubrication, or replacement.
- Warranty: The device comes with a warranty, typically 24 months for general use and 12 months for commercial use, with extensions possible for the tank.
- Spare Parts: Spare parts are available for purchase from the manufacturer's website. |
To Next Page
Need help?
General
