Kwik Mark KM-64 - Express Text Setup Guide; Standard Job Setup Guide

Section 4.0 - Rules
Work Safely. Always wear safety glasses near the machine.
There are two ways to setup a marking job: Express Text and Standard Job Setup
Both (F1 & F8) are described below and explained in detail in the following pages.
Rules
Express Text Setup
When you just want to mark a line of text and do not
need to save the le.
Press F1
• Type the text to be marked (Enter)
• Type text height, or accept the default (Enter)
The machine is now in Run mode and ready.
The machine will mark the text you just typed when you
press the Space Bar.
Standard Job Setup
Full availability of all features and functions. No limit
to number of lines or le size. Saves the le to the
machine’s CF card memory.
Press F8
The software will prompt the user to dene the following
properties:
• File Name
• Line Type
o Normal
o Serial
o Graphic
o Date Code
o Variable
o Move
• Text to be Marked
• Text Height
• X & Y Text Positions
• Line Style
o Regular
o Arc Text
o Angular
• Accept?
• Another Line?
The machine is now in Run mode and ready.
The machine will mark the job you setup when you
press the Space Bar.