Kwik Mark KM-64 - Function Key and Page Navigation

Section 5.0 - Controls
Work Safely. Always wear safety glasses near the machine.
NORMAL MODE
• Enters tool and clearance depth setting mode. See Z axis controls.
ROTARY VALVE SETUP
• Jogs 4th axis up
PROGRAMMABLE MODE
• User dened functionality. Setup to accept all supported G-codes and custom commands.
See Setup Section
NORMAL MODE
• Enters tool edit mode. See Z axis controls.
ROTARY VALVE SETUP
• Jogs 4th axis down
NORMAL MODE
• Jogs Z axis up. Time/touch sensitive.
(If equipped)
NORMAL MODE
• Jog Z axis down. Time/touch sensitive.
(If equipped)