Kwik-Wall 2030 - SECTION TWO-Non-Standard Options; Initial Closure; Final Closure

Operations and Maintenance Manual 1-6
KWIK-WALL Company Operable Wall Systems
SECTION TWO—Non Standard Options
Initial Closure Options
ADJUSTABLE STARTER JAMB
The Adjustable Starter Jamb consists of two (2) aluminum extrusions which are
permanently mounted to a structural wall surface and are field-adjustable to
compensate for out-of-plumb conditions of the fixed wall. The lead panel edge is
equipped with a tongue-and-groove type vertical rail that will interlock with the
jamb.
FIXED STARTER JAMB
The Fixed Starter Jamb consists of an aluminum extrusion which is
permanently mounted to a structural wall surface. The lead panel edge is
equipped with a tongue-and-groove type vertical rail that will interlock with the
jamb.
Final Closure Options
COMMUNICATING PANEL CLOSURE
The Communicating Panel closure consists of a full-sized panel hinged
permanently and directly to a structural wall. It functions as a full height
Pass Door and includes an adjustable bottom seal and flush pull handles.
HINGED PANEL CLOSURE
This option performs the same functions as a Communicating
Panel but is too small to be used as a Pass Door.