Do you have a question about the Kwikot Kwiksol and is the answer not in the manual?
For areas above 5°C with good water quality; uses flat plate collectors or vacuum tubes.
For areas below 5°C with good water quality; uses vacuum tubes.
For areas with frost and poor water quality; uses heat exchanger with propylene glycol.
Defines optimal roof orientation, pitch angles, and shading considerations for panels.
Provides step-by-step instructions for mounting collector panels on pitched roofs.
Diagram and description for direct/indirect thermosyphon close coupled systems with flat plate collectors.
Diagram and description for direct/indirect thermosyphon split systems with flat plate collectors.
Diagram and description for direct/indirect split pump circulation systems with flat plate collectors.
Diagram and description for direct system thermosyphon installation with solar vacuum tubes.
Key considerations for indirect systems and pipe lagging during installation.
Steps to fill the direct system with water and bleed air.
Steps to fill the indirect system with propylene glycol/water mixture.
Guidelines on system tampering, hot pipes, and glycol storage.
Steps to take in case of system problems or leaks.
Covers installer's warranty for system installation and operation.
General Kwikot warranty terms for solar system components, covering p19-20.
Section for the installer to record their contact and company information.
Section for recording system serial number, code, and installation date.
Section for the installer to specify the duration of the installation warranty.
Homeowner information required to validate the Kwikot product warranty.
Installer information required to validate the Kwikot product warranty.
Details of the installed solar system for warranty validation.
| Brand | Kwikot |
|---|---|
| Model | Kwiksol |
| Category | Water Heater |
| Language | English |