ENGLISH ENGLISH
Re-connecting to Bluetooth® devices
Every time the headphone is switched on, it will connect to the nearest
and the last connected device automatically.
When the headphone is in standby mode and doesn’t connect to any
device, short press the MFB buton and it will connect to last connected
device automatically.
Note: Headphones can be paired with two devices simultaneously.
In theory, it can support all equipment with Bluetooth®-enabled phone or
music device that supports Advanced Audio Distribution Profile (ADP)
and Audio Video Remote Control Profile (AVRCP). In order for Bluetooth®
devices to communicate with one another properly, they must utilize
the same Bluetooth® profile. To determine the profiles supported by your
device, please refer to the device’s user guide. Certain Bluetooth features
including those listed may not be supported by all compatible Bluetooth®-
enabled devices, and/or the functionality of such features may be limited
in certain devices.
Mobile Devices Supported
To Next Page
Loading...