Kygo A4/300 - General Function; Battery Charging

ENGLISH ENGLISH
 
Batery charging
The headphone comes with a built in rechargeable batery. Before using
it for the first time we recommend you charge the batery fully. Only use
the supplied micro USB cable to charge the headphone. Please charge
for 3 hours. Connect the micro USB connector of the charging cable into
the micro USB port of the headphone. Connect the other end of the USB
cable to your computer’s USB port or to an optional USB wall charger (not
included).
The RED LED is on when the batery is charging. The RED LED is of when
the batery is fully charged.
When charging
The RED LED is on when the batery is charging. The RED LED is of when
batery is fully charged.
When using the earphone
The RED and BLUE LEDs blink alternately when the headphone is in
the pairing mode. Standby mode: the BLUE LED flashes rapidly. Music
playback mode: the BLUE LED flashes slowly. The RED LED blinks with
sound alert when the batery has low power.
General Function