KYMCO Dink-R150 - User Manual

WARNING
To avoid damage from the electronic fuel injection system, do not remove or install the
battery when the ignition switch is in the " " position.
The long-term storage of the vehicle could cause fuel and engine oil deterioration and
probably get into a non-start situation.
Service more frequently when operating in severe conditions such as dusty area, high
speed riding, frequent start and stop or extreme riding habit.
Make sure to keep away from any flammable materials such as dry grasses or leaves,
avoid them in contact with the exhaust pipe or muffler when parking the vehicle.

Summary

Section 1 - Forward and Safety Introduction

Scooter Safety

General safety guidelines and recommendations for operating the scooter safely.

Accessories & Modifications

Guidelines for selecting, installing, and avoiding unauthorized modifications to accessories.

Section 2 - Controls & Features

Keyless Remote Control Operation

Explanation of the keyless system, its operation, and battery replacement.

Ignition Switch and Steering Lock

ABS System Explanation

Section 3 - Operation

Pre-ride Inspection

Essential checks to perform on the motorcycle before each ride for safety.

Starting the Engine

Proper Riding Method

Techniques for safe acceleration, braking, cornering, and parking.

Section 4 - Maintenance

Importance of Maintenance

Engine Oil

Brake Fluid

Tires

Information on tire pressure, size, inspection, and replacement.

Dink-R 125 Specifications

Dink-R 150 Specifications

KYMCO Dink-R150 Specifications

General

Transmission	CVT
Front Suspension	Telescopic Fork
Front Brake	Disc
Bore x Stroke	57.4 mm x 57.8 mm
Starting System	Electric