PREFACE
This Service Manual describes the technical features and
servicing procedures for the KYMCO GRAND DINK 50.
In this manual, many illustrations and drawings are used to help
servicemen have better understanding.
Section 2 contains the service precautions for all operations and
troubleshooting stated in this manual. Read them carefully before
starting any operation.
Section 3 describes the inspection/adjustment procedures, safety
rules and service information for each part, starting from periodic
maintenance.
Sections 4 through 16 give instructions for disassembly, assembly
and inspection of lubrication system, engine, fuel system and
electrical equipment.
Section 17 is the maintenance and inspection directions for the
evaporative/ exhaust emission control system. Most sections start
with an assembly or system illustration and troubleshooting for the
section. The subsequent pages give detailed procedures for the
section.
KWANG YANG MOTOR CO., LTD.
OVERSEAS SALES DEPARTMENT
OVERSEAS SERVICE SECTION
OCTOBER 2004
The information, specifications, and
illustrations included in this manual
may be different from the motorcycle
in case specifications are changed.
• •
To Next Page
Need help?
General
