Name: KYMCO MYROAD 700i
Brand: KYMCO
Rating: 4 (1 reviews)

To Next Page

To Previous Page

3. INSPECTION/ADJUSTMENT

3-22

MYROAD 700i

ADJUSTMENT

Place the scooter on its center stand.

Release the parking brake lever lock.

Pull up the parking brake lever.

Loosen the lock nut.

Turn the adjust bolt until you feel resistance

when turn the rear wheel by your hand.

Hold the adjust bolt and tighten the lock nut

securely.

Release the parking brake lever.

Make sure the rear wheel turns smoothly.

Pull the parking brake lever slowly and check

the lever stroke.

Standard: 3－6 notches

HEADLIGHT AIM

Place the scooter on a level surface.

Adjust the headlight beam vertically by

turning the vertical beam adjuster.

A clockwise rotation moves the beam up and

counterclockwise rotation moves the beam

down.

Adjust the headlight beam horizontally by

turning the horizontal beam adjuster.

A clockwise rotation moves the beam toward

the right side of the rider.

Nut Bol

Vertically Adjusting Screw

Horizontally Adjusting Screw

Adjust the headlight beam as specified

by local laws and regulations.

＊

Other manuals for KYMCO MYROAD 700i

Questions and Answers:

Need help?

Do you have a question about the KYMCO MYROAD 700i and is the answer not in the manual?

General