KYMCO PEOPLE 250 User Manual

－29－
5. ENGINE STARTING METHODS
(1) TURN THE IGNITION SWITCH " "
Unlock the steering handlebar.
Turn the ignition switch to the " " position.


Check the gasoline volume and engine oil level before
starting the engine.
Be sure to erect the main stand while starting the
engine and side stand is up.
Before starting the engine , the side stand shall be
kicked up to secure safety.



(2) LOCK THE REAR WHEEL
Apply the rear brake lever to connect the power for
starting.



In order to prevent the scooter from rushing out at
high speed, make sure to lock the rear wheel.
If free play of the rear brake lever is incorrect, the rear
cannot be braked and it will cause danger easily.wheel
CAUTION:
CAUTION:

KYMCO PEOPLE 250 Specifications

General

Displacement	249 cc
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Front Tire	110/70-16
Rear Tire	140/70-16
Transmission	CVT
Seat Height	800 mm
Width	780 mm