KYMCO PEOPLE S 150 User Manual

WARNING
WARNING
To avoid damage from the electronic fuel injection system, do not remove or install the
battery when the ignition switch is in the " " position.
The long-term storage of the vehicle could cause fuel and engine oil deterioration and
probably get into a non-start situation.
Service more frequently when operating in severe conditions such as dusty area, high
speed riding, frequent start and stop or extreme riding habit.
Make sure to keep away from any flammable materials such as dry grasses or leaves,
avoid them in contact with the exhaust pipe or muffler when parking the vehicle.

KYMCO PEOPLE S 150 Specifications

General

Fuel System	Electronic Fuel Injection
Cooling System	Air-cooled
Starter	Electric
Transmission	CVT
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Length	2, 085 mm
Engine Type	Single-cylinder, 4-stroke
Max Power	13.5 hp @ 8, 500 rpm
Height	1130 mm
Fuel Capacity	7.5 liters
Rear Suspension	Twin shocks

Summary

SAFETY INTRODUCTION

Scooter Safety Guidelines

Essential safety practices and recommendations for riding the scooter.

Protective Riding Gear

Recommended clothing and safety equipment for rider protection.

CONTROLS AND FEATURES

Ignition Switch Operation

Handlebar Controls

OPERATION

Pre-Ride Inspection Procedure

Essential checks to perform before operating the scooter for safety.

Engine Break-In and Starting

Procedures for the initial break-in period and starting the engine.

MAINTENANCE

Maintenance Schedule Overview

Summary of scheduled maintenance tasks, intervals, and service codes.

Engine Oil and Transmission Oil

Engine oil and transmission oil recommendations and service procedures.

Spark Plug and Brake System