KYMCO XCITING 400i User Manual

1. E xt e r na l Com p one nt s XCITING 400 i
1-1
E x t e r n a l C o m pon e n t s
This chapter covers the location and servicing of the external components for the
KYMCO XCITING 400i.
• Exhaust System 2-11
• Seat 12-13
• Luggage Box 14-16
• Rear Carrier 17-18
• Center Cover 19-20
• Side Covers 21-22
• Body Cover 23-32
• Front Cover 33-45
• Front Cover Meter 46-49
• Inner Cover 50-57
• Front Fender 58-60
• Rear Fender 61-66
• Handlebar Cover 67-71
• Under Cover 72-73

KYMCO XCITING 400i Specifications

General

Displacement	399 cc
Cooling System	Liquid-cooled
Transmission	CVT
Front Suspension	Telescopic fork
Front Brake	Dual disc
Rear Brake	Single disc
ABS	Yes
Width	800 mm
Seat Height	805 mm
Fuel Capacity	12.5 liters
Curb Weight	213 kg
Fuel System	Electronic Fuel Injection
Max Power	26.5 kW (36 hp) @ 7500 rpm
Max Torque	37.7 Nm
Height	1285 mm
Rear Suspension	Dual shocks
Length	2220 mm

Summary

External Components

Exhaust System

Procedures for removing and installing the exhaust system components.

Seat

Provides instructions for removing and installing the vehicle seat.

Luggage Box

Details the process for removing and installing the luggage box.

Rear Carrier

Step-by-step guide for removing and installing the rear carrier.

Center Cover

Instructions for the removal and installation of the center cover.

Side Covers

Procedures for removing and installing the left and right side covers.

Body Cover

Covers removal, disassembly, and installation of the main body cover.

Front Cover

Details windshield, front cover, and light assembly removal and installation.

Front Cover Meter

Procedures for removing and installing the front cover meter assembly.

Inner Cover

Instructions for removing and installing the inner cover components.

Front Fender

Covers the removal and installation of the front fender.

Rear Fender

Details the removal and installation of the rear fender.

Handlebar Cover

Procedures for removing and installing upper and lower handlebar covers.

Under Cover

Instructions for removing and installing the under cover.