Kyocera DE-9100 - Page 61

2-45
The main unit setup procedure > Ink initial supply (Set up flow)
[CONFIDENTIAL]
29
Place the cap [B] on the waste ink tank [A] remove from the main unit in the direction
of the arrow.
30
Insert the new waste ink tank [A] in the direction of the arrow.
31
Remove the cap [B] from the waste ink tank and place it on the storing place [C].
32
Close the waste ink tank cover [A] and lock by rotating the lock lever [B] in the
direction of the arrow.
[B]
[A]
[A]
[A]
[B]
[C]
[A]
[B]