EasyManua.ls Logo

Kyocera Hydro EDGE - Get Your Phone Ready; Install the Battery; Charge the Battery; Powering On and Off

Kyocera Hydro EDGE
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Get Ready
visit sprint.com/readynow for more information to get your phone up and running 1
Get Your Phone Ready
Install the Battery
1. Slide the battery cover lock to the unlocked
position.
2. Insert your thumbnail or fingernail into the slot
and lift the battery cover gently.
3. Insert the battery, contacts end first, and gently
press the battery into place.
4. Replace the battery cover, making sure all the tabs
are secure and there are no gaps around the cover.
5. Slide the battery cover lock to the locked position.
Charge the Battery
1. Plug the smaller end of the USB cable into the
phone's charger/accessory jack.
2. Plug the other end of the USB cable into the
charger, and then plug the charger into an
electrical outlet.
Turn the Phone On
► Press and hold the Power button to turn your
phone on.
Turn the Screen On and Off
► To turn the screen on and off, press the
Power button.
Unlock the Screen
► Touch and hold the screen and flick
toward to unlock the screen.
Turn the Phone Off
► Press and hold the Power button on top of the
phone and then touch Power off > OK to turn
the phone off.
Before you start: Visit sprint.com/readynow to
learn about transferring contacts, calendars,
and more from your old phone.