Kyocera MA2001 User Manual

8-15
Maintenance
Maintenance Menu
The Maintenance Menu that the user can adjust from KYOCERA Client Tool is described below. In addition, also refer to
KYOCERA Client Tool User Guide.
Maintenance Menu Description
Adjust print
quality
Altitude setting If you are using the machine at an altitude of 1500 m or higher and print
quality has deteriorated, the Altitude setting can be used to restore print
quality.
Adjust print
position
Printing start
position
Single-sided printing
Adjust the position of the printed
image.
Print margins Adjust the width of the top edge,
bottom edge, left edge and right edge
margins.
Note This setting is not effective for
the printing from the machine.
B
A: Left edge
B: Top edge
Top edge: +10
A
B
D
A: Left edge
B: Top edge
C: Right edge
D: Bottom edge
Top edge: +10
AC

Kyocera MA2001 Specifications

General

Print speed (black, normal quality, A4/US Letter)	20 ppm
Standard input capacity	250 sheets
Output capacity	100 sheets
Paper size (max)	A4
Warm-up time	Less than 15 seconds
Time to first page (black, normal)	Less than 8.5 seconds