Kyocera TASKalfa 8353ci - Sleep Level (Energy Saver) (Models Except for Europe); Energy Saver Recovery Level; Weekly Timer Settings; Power off Timer (Models for Europe)

2-43
Installing and Setting up the Machine > Energy Saver Function
Sleep Level (Energy Saver) (models except for
Europe)
This mode reduces power consumption even more than normal Sleep Mode, and allows Sleep Mode to be set
separately for each function. Printing from a computer connected with a USB cable is not available while the machine is
asleep. The time required for the machine to wake up from power save mode and resume normal operation will be
longer than for normal Sleep Mode.
For more information on Sleep Level (Energy Saver) Mode settings, refer to the following:
Energy Saver Setup (page 2-45)
Energy Saver Recovery Level
This machine can reduce power consumption when recovering from Energy Saver Mode.
For EnergySaver RecoveryLevel, "Full Recovery", "Normal Recovery" or "Power Saving Recovery" can be selected.
The factory default is "Normal Recovery".
For more information on Energy Saver Mode settings, refer to the following:
Energy Saver Setup (page 2-45)
EnergySaver RecoveryLevel (page 8-80)
Weekly Timer Settings
Set the machine to automatically sleep and wake up at times specified for each day.
For more information on Weekly Timer Settings, refer to the following:
Energy Saver Setup (page 2-45)
Weekly Timer Settings (page 8-81)
Power Off Timer (models for Europe)
If the machine is not used while in sleep mode, the power automatically turns off. The Power Off Timer is used to set the
time until the power turns off.
The factory setting for the time until the power turns off: 3 days
Power Off Timer (models for Europe) (page 8-81)
NOTE
If the optional Network Interface Kit is installed, Energy Saver cannot be specified.