Need help?Do you have a question about the Kyocera TASKalfa 5004i and is the answer not in the manual?
General| Category | Printer |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Duplex Printing | Yes |
| Maximum Paper Size | A3 |
| Warm-up Time | 17 seconds or less |
| Max Paper Size | A3 |
| Scan Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Print Speed | 50 ppm |
| Memory | 4 GB |
| Hard Disk Drive | Optional 320 GB HDD |
| Connectivity | USB 2.0, Ethernet, Optional Wireless |
| Monthly Duty Cycle | 225, 000 pages |
| Copy Speed | 50 ppm (A4) |
| Network Connectivity | Gigabit Ethernet (10BaseT/100BaseTX/1000BaseT), optional Wi-Fi (IEEE 802.11b/g/n), optional Wi-Fi Direct |
Instructions for logging into the device using username and password.
Steps to cancel a selected job from the operation panel.
Launching a web browser and navigating to the machine's IP address.
Authenticating to the Command Center RX with administrator credentials.
Responding to on-screen error messages and indicators.
Following panel instructions to remove jammed paper.
To Next Page