To Next Page
D
Donna WelchSep 23, 2025
What to do if my Kyocera Printer prints a full single color?
- DDavid WardSep 23, 2025
Open the left cover and check that the main charger unit is correctly installed.
What to do if my Kyocera Printer prints a full single color?
Open the left cover and check that the main charger unit is correctly installed.
How to troubleshoot completely blank printouts from Kyocera FS-1300D?
If your Kyocera Printer is producing completely blank printouts, open the front cover and check that the toner container is correctly installed in the printer.
How to fix vertical streaks on Kyocera FS-1300D Printer prints?
If your Kyocera Printer is showing vertical streaks on printouts, check the toner container and replace if needed. Additionally, clean the charger wire and ensure the charger cleaner of the drum unit is in its original position.
What to do if Kyocera FS-1300D Printer has a paper jam?
If your Kyocera Printer has a paper jam during printing, open the printer cover and remove the jammed paper.
What to do if my Kyocera FS-1300D Printer prints a completely blank page?
First, open the printer top cover and check that the toner containers are correctly installed in the printer. Also, ensure that the application software is correctly operated.
What to do if my Kyocera FS-1300D Printer prints a status page but not print jobs from the computer?
Ensure both ends of the printer cable are securely connected. If the issue persists, try replacing the printer cable or the interface cable. If the problem occurs only with a specific file or application, check the printer driver settings for that application and try printing another file or using another print command.
What to do if my Kyocera Printer prints faint or blurred images?
You can clean the main charger units. Also you can make sure the paper type setting is correct for the paper being used. Another solution is to conduct color calibration either by switching the printer off then on or using the printer operation panel. Also, try adjusting the color control settings using the printer driver. If the Toner low C,M,Y,K message is displayed with color description, install a new toner kit for the color. Also, refresh the drum by performing the procedures on the operation panel and try cleaning the drum surface using the printer's built-in cleaning system.
What to do if my Kyocera Printer has a grey background on printouts?
Clean the main charger units. Another solution is to conduct color calibration either by switching the printer off then on or using the printer operation panel.
Why is my Kyocera FS-1300D printing faint or blurred?
If your Kyocera Printer is printing with faint or blurred output, check the toner container and replace it if necessary. Also, clean the charger wire.
Why is vapor coming out of my Kyocera FS-1300D Printer?
If you see vapor coming from the top tray of your Kyocera Printer, it might be due to low temperature near the printer or humidity in the paper. The heat during printing can cause moisture in the paper to evaporate. This is generally not a problem, and printing can continue. To reduce the vapor, increase the room temperature and use paper stored in a dry place.
Information regarding software compatibility and usage with the printer.
Lists registered trademarks and company names mentioned in the guide.
Terms and conditions for the IBM software included with the device.
Acknowledgement of typeface trademarks used in the printer.
License agreement for Monotype Imaging software and typefaces.
Information on laser safety certification and hazards.
Details on laser product certification and standards compliance.
Declaration of compliance for the radio frequency transmitter module.
Notes on radio tag technology usage and potential restrictions.
Regulations regarding laser products from the CDRH.
Information on ozone generation and ventilation recommendations.
Guidelines for placing the printer in a suitable environment.
Additional precautions for safe operation and performance.
Safety warning about keeping plastic bags away from children.
General warnings and precautions for operating the printer safely.
Precautions to take when handling toner containers and consumables.
Identifies external components of the printer's front.
Identifies external components of the printer's rear.
Details the printer's control panel and its elements.
Explains the meaning of the printer's status indicators.
Describes the function of the printer's control keys.
Details paper weight, thickness, moisture content, and other properties.
Instructions on preparing paper before loading it into the printer.
Step-by-step guide for loading paper into the printer's cassette.
Instructions for loading paper into the MP tray.
Instructions for connecting the printer via USB and power cord.
Step-by-step guide for installing the printer driver on Windows.
Instructions for installing the printer driver on Mac OS.
Procedure for printing documents using the printer driver.
Information on monitoring printer status and settings.
Utility for checking and changing printer settings.
Steps to remove printer software from the computer.
Overview of basic maintenance tasks for the printer.
Detailed steps for replacing the toner container.
Instructions for cleaning internal printer components.
Guidance on handling the printer during periods of inactivity or relocation.
Basic troubleshooting steps for common printer issues.
Diagnosing and resolving issues related to print output quality.
Explanation of printer status indicators and their meanings.
Procedures for identifying and clearing paper jams.
Overview of available optional hardware for the printer.
Information on installing and using memory expansion modules.
Details on the optional paper feeder unit.
Instructions for installing and using the network interface card.
Information on using CompactFlash cards for storage.
Technical specifications for FS-1100 and FS-1300D models.
Compliance with environmental standards and requirements.
General| Color | No |
|---|---|
| Duplex printing | Yes |
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 6 s |
| Print speed (black, normal quality, A4/US Letter) | 28 ppm |
| Internal memory | 32 MB |
| Processor model | PowerPC 405F5 |
| Maximum internal memory | 528 MB |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 53 dB |
| Total input capacity | 250 sheets |
| Total output capacity | - sheets |
| Maximum input capacity | 800 sheets |
| Standard media sizes | 105 x 148 mm - 215.9 x 297 |
| Compatible operating systems | Windows, Mac OS X |
| Maximum print size | 216 x 356 mm |
| Paper tray media types | Card stock, Envelopes, Labels, Plain paper, Recycled paper |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Maximum duty cycle | 20000 pages per month |
| Display | LCD |
| Certification | TÜV/GS, CE, PTS |
| Power consumption (printing) | 439 W |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
Weight and Dimensions| Dimensions (WxDxH) | 375 x 393 x 250 mm |
|---|
