How to solve Kyocera Printer printing incomplete or out of position?
If your Kyocera Printer is printing incomplete or out of position, make sure the printing settings are correct in both the application software and the printer driver. Also, check for any PRESCRIBE command errors, especially if the issue occurs with a specific file or program, as it could be due to a command parameter or syntax error.
Why does my Kyocera FS-1300D have a gray background on prints?
If your Kyocera Printer is printing with a gray background, check the toner container and replace it if necessary. Also, verify that the developer unit and drum unit are installed correctly.
How to fix Kyocera FS-1300D when it will not print from the computer?
If your Kyocera Printer won't print from the computer, first, check for any errors and clear them. If the status page prints fine, the issue might be the computer connection, so refer to the Installation Guide. You can also try turning the printer off and on again, then retry the print job.
What to do when Kyocera FS-1300D Printer toner has run out?
If your Kyocera Printer's toner has run out, replace it with a new toner container and clean the inside of the printer after replacement.
Why is vapor coming out of my Kyocera FS-1300D Printer?
If you see vapor coming from the top tray of your Kyocera Printer, it might be due to low temperature near the printer or humidity in the paper. The heat during printing can cause moisture in the paper to evaporate. This is generally not a problem, and printing can continue. To reduce the vapor, increase the room temperature and use paper stored in a dry place.
What to do if Kyocera FS-1300D prints status page but not data?
If your Kyocera Printer prints a status page but not data from your computer, the problem might be with program files or application software. Try printing a different file or using another print command. If it's specific to one file or application, check the printer settings for that application. Also, make sure the interface cable is securely connected at both ends. If that doesn't work, try replacing the printer cable.
What does 'Paper jam ###############' mean on my Kyocera Printer?
A paper jam has occurred. The location of the paper jam is indicated in place of the #’s.
How to fix a Kyocera Printer that won't turn on?
First, check that the power cord is properly plugged into the power outlet. Turn off the printer’s power, plug in the power cord securely, and try turning on the printer’s power again. Also, check that the power switch is in the On (|) position; if not, set it to the On position.
What to do if my Kyocera FS-1300D Printer has black or white vertical streaks?
If the Toner low C,M,Y,K message is displayed on the operation panel with a color description, install a new toner kit for the color. Also you can clean the main charger units or refresh the drum by performing the procedures on the operation panel and try cleaning the drum surface using the printer's built-in cleaning system.
What to do if my Kyocera FS-1300D Printer prints a completely blank page?
First, open the printer top cover and check that the toner containers are correctly installed in the printer. Also, ensure that the application software is correctly operated.
General| Color | No |
|---|---|
| Duplex printing | Yes |
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 6 s |
| Print speed (black, normal quality, A4/US Letter) | 28 ppm |
| Internal memory | 32 MB |
| Processor model | PowerPC 405F5 |
| Maximum internal memory | 528 MB |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 53 dB |
| Total input capacity | 250 sheets |
| Total output capacity | - sheets |
| Maximum input capacity | 800 sheets |
| Standard media sizes | 105 x 148 mm - 215.9 x 297 |
| Compatible operating systems | Windows, Mac OS X |
| Maximum print size | 216 x 356 mm |
| Paper tray media types | Card stock, Envelopes, Labels, Plain paper, Recycled paper |
| Non-ISO print media sizes | Letter |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Maximum duty cycle | 20000 pages per month |
| Display | LCD |
| Certification | TÜV/GS, CE, PTS |
| Power consumption (printing) | 439 W |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
Weight and Dimensions| Dimensions (WxDxH) | 375 x 393 x 250 mm |
|---|
Information regarding software compatibility and usage with the printer.
Lists registered trademarks and company names mentioned in the guide.
Terms and conditions for the IBM software included with the device.
Acknowledgement of typeface trademarks used in the printer.
License agreement for Monotype Imaging software and typefaces.
Information on laser safety certification and hazards.
Details on laser product certification and standards compliance.
Declaration of compliance for the radio frequency transmitter module.
Notes on radio tag technology usage and potential restrictions.
Regulations regarding laser products from the CDRH.
Information on ozone generation and ventilation recommendations.
Guidelines for placing the printer in a suitable environment.
Additional precautions for safe operation and performance.
Safety warning about keeping plastic bags away from children.
General warnings and precautions for operating the printer safely.
Precautions to take when handling toner containers and consumables.
Identifies external components of the printer's front.
Identifies external components of the printer's rear.
Details the printer's control panel and its elements.
Explains the meaning of the printer's status indicators.
Describes the function of the printer's control keys.
Details paper weight, thickness, moisture content, and other properties.
Instructions on preparing paper before loading it into the printer.
Step-by-step guide for loading paper into the printer's cassette.
Instructions for loading paper into the MP tray.
Instructions for connecting the printer via USB and power cord.
Step-by-step guide for installing the printer driver on Windows.
Instructions for installing the printer driver on Mac OS.
Procedure for printing documents using the printer driver.
Information on monitoring printer status and settings.
Utility for checking and changing printer settings.
Steps to remove printer software from the computer.
Overview of basic maintenance tasks for the printer.
Detailed steps for replacing the toner container.
Instructions for cleaning internal printer components.
Guidance on handling the printer during periods of inactivity or relocation.
Basic troubleshooting steps for common printer issues.
Diagnosing and resolving issues related to print output quality.
Explanation of printer status indicators and their meanings.
Procedures for identifying and clearing paper jams.
Overview of available optional hardware for the printer.
Information on installing and using memory expansion modules.
Details on the optional paper feeder unit.
Instructions for installing and using the network interface card.
Information on using CompactFlash cards for storage.
Technical specifications for FS-1100 and FS-1300D models.
Compliance with environmental standards and requirements.
To Next Page