Need help?Do you have a question about the Kyocera FS-1320D and is the answer not in the manual?
General| Print Technology | Laser |
|---|---|
| Paper Input Capacity | 250 sheets |
| Connectivity | USB 2.0 |
| Memory | 32 MB |
| Warm-up Time | 15 seconds or less |
| Multi-purpose Tray Capacity | 50 sheets |
| Print Speed | 20 ppm |
| Resolution | 1200 dpi |
| Paper Size (Main Tray) | A4, Letter, Legal |
| Print Media Sizes (Non-standard) | 70 x 148 mm to 216 x 356 mm |
Explains safety symbols and general warnings for safe operation.
Provides comprehensive technical details of the printer models.
Illustrates and names the external parts of the printer.
Shows a cutaway view of the printer's internal components.
Specifies conditions and location requirements for printer setup.
Step-by-step guide for unpacking and setting up the printer.
Instructions for adding memory cards and network interface cards.
How to enter and perform operations in service modes.
Procedures for printing status pages and event logs.
Guidance on toner installation and maintenance kit replacement.
Steps to diagnose and fix paper feed problems and jams.
How to interpret self-diagnostic codes shown by printer indicators.
Troubleshooting guide for issues like blank pages, streaks, or spots.
Procedures for diagnosing and correcting electrical and mechanical failures.
Essential safety guidelines for working on the printer.
Step-by-step instructions for disassembling key printer parts.
Guidance on removing and installing various PWBs.
Instructions for updating the printer's firmware using a memory card.
Details on paper feed, conveying, exit, and duplex systems.
Explains the drum, charger, scanner, and developing units.
Information on toner transfer, cleaning, and fuser unit operations.
Identifies and describes the function of each PWB in the printer.
Lists and defines the purpose of all switches and sensors.
Explains the functions of the power source and control PWBs.
A detailed schematic of all electrical connections within the printer.
A guide to diagnosing print quality issues based on defect recurrence.
Visual aids for understanding printer error codes and indicators.
A list of replaceable maintenance parts with their part numbers.
To Next Page