Kyocera TASKalfa 8353ci - Page 444

8-54
Setup and Registration (System Menu) > System Menu
Wi-Fi Settings
[System Menu/Counter] key > [System/Network] > [Network] > [Wi-Fi Settings]
Set Wi-Fi.
Wi-Fi
Setup
Persistent Group Set whether Wi-Fi Direct connection as Persistent Group (information for the
connection is kept even if the power is turned off).
Value: Off, On
NOTE
This function is displayed when [Wi-Fi Direct] is set to [On].
Password Select whether to generate the Wi-Fi Direct password automatically or create it
manually.
Value: Auto Generation, Manual Creation
NOTE
• When [Manual Creation] is selected, the Persistent Group setting will turn [On].
• The setting will be changed after restarting the device or network.
NOTE
This function is displayed when the Wireless Network Interface Kit (IB-35) is installed.
The Wireless Network Interface Kit is an option for some models. Contact your dealer or our sales or service
representatives for detail.
IB-35 "Wireless Network Interface Kit" (page 11-6)
Item Description
Wi-Fi Select whether to use Wi-Fi.
Value:
Off, On
Item Description
Connection Status Check the wireless LAN status.
Quick Setup If the machine will connect to an access point that supports the automatic wireless
network setup, connection settings can be configured by Quick Setup.
Available Network Displays access points to which the machine can connect.
WEP Key Index Select the key index of the access point.
Value:
0 to 3
Push Button Method If the access point supports the push button method, wireless settings can be
configured using the push button. This setting executes push button, and the
connection is started by pressing the push button on the access point.
NOTE
The push button method supports only the WPS.
PIN Code Method
(Device)
Starts connection using the machine's PIN code. Enter the PIN code into the access
point. The PIN code of the machine is automatically generated.
Item Description