Kyosho Concept 30 SR User Manual

Highlights that the helicopter is not a toy and requires user responsibility for safe operation and potential damage.

Guides the assembly of the main rotor grips, including detailed part placement and screw types.

Covers the essential steps for preparing the engine, including clutch bell and starter cone assembly.

Covers the detailed assembly of the tail rotor components, including grips, pitch plates, and bearings.

Guides the assembly and installation of the tail boom, control rods, and guide brackets.

Guides the installation of the receiver, battery, gyro, and associated wiring and mounting.

Provides a guide for radio setup, including control surface throws, curves, and gyro switch settings.

Explains the importance of balancing blades and how to use a blade balancer for optimal performance.

Emphasizes checking all screws, nuts, and linkages for tightness and proper function before flight.

Details how to check the movement of control rods for all primary flight controls to ensure correct response.

Details the step-by-step procedure for safely starting the helicopter's engine, including safety checks.

Offers a flowchart to diagnose common engine starting and running problems.

Guides on how to check and adjust main blade tracking for smooth flight and to prevent vibration.

Details how to adjust radio trims for tail rotor, cyclic, and throttle to achieve stable flight.

Provides essential checks and advice before attempting to hover, including gyro direction and safety gear.

Instructs on practicing hovering techniques, emphasizing stationary control and consistent lift.

Guides on how to perform basic circling maneuvers, maintaining nose direction and altitude.

Provides techniques for safely landing the helicopter, focusing on approach angle and control.

Explains the auto-rotation system and procedure to minimize damage if the engine stops during flight.