To Next PageTo Next Page
Need help?Do you have a question about the Kyosho Syncro EX-6 and is the answer not in the manual?
General| Channels | 6 |
|---|---|
| Modulation | MHS/FHSS |
| Display | LCD |
| Telemetry | Yes |
| Battery Count | 4 |
| Power Supply | 4 AA batteries |
Essential safety instructions for handling the transmitter and its components to prevent injury or damage.
Guidelines for safe battery storage, charging, and disposal to prevent hazards.
Step-by-step instructions for assembling and disassembling the transmitter unit.
Guide to installing transmitter batteries and understanding low voltage warnings.
Procedure for initializing the EX-6 transmitter for first-time use.
Correct sequence for powering the transmitter and model on and off.
Verifying the selected model and checking control responsiveness before driving.
Using keys (L, R, ENT, BACK) to navigate menus and change settings.
Instructions for mounting the expansion unit facing front or sideways.
Calibrating steering and throttle sensor information for system accuracy.
Instructions for switching between ASF and MHS modulation modes.
Preparing transmitter and MINI-Z for the pairing process.
Verifying successful pairing and preparing for normal operation.
Managing multiple model memories, including selection, naming, and storage.
Copying existing model settings and resetting to factory defaults.
Mapping transmitter keys (ET1-ET5, BT1) to specific functions.
Selecting the transmitter battery type for power management.
Understanding and responding to low battery voltage warnings.
Recalibrating steering and throttle sensor positions for accuracy.
Adjusting steering movement range for full lock.
Balancing left/right steering angles for matching turning radii.
Fine-tuning steering neutral position and overall steering range.
Adjusting steering response ratio based on steering angle.
Quickening steering's initial response for stronger turning.
