KYOTA Kofuko E330 User Manual

72 Stard Road, Seabrook, NH 03874 | (800)-242-0761 | www.kyotamassagechairs.com
Version 2.0
E330 Kofuko
Massage Chair
1
STEP 1:
Carefully check box contents to the detail below, making sure all
contents are accounted for.
If anything is missing, please contact Kyota Massage Chairs
at 800 242-0761. Do not return to the place of purchase.
SCAN CODE
Before assembling your chair, watch an assembly video at:
www.kyotamassagechairs.com/assembly-tutorials
Alternatively, scan the QR code to go directly to the URL above.
Assembly Guide
The Worlds Most
Advanced Massage Chairs
The Worlds Most
Advanced Massage Chairs
2
Step 2:
Open the box by lifting the
top upwards.
Step 3:
Remove packaging
materials. Locate the
arm panels sitting in
the chair and set them
to the side. Remove
protective covering
from the chair.
3
Step 4:
Using a box cutter or
sharp object, cut the
panels on the
cardboard tray at the
back of the chair. This
will create a runway to
wheel your chair out
onto the floor.
4
Power Cord
BOX 1: Chair Body & Power Cord
Arm panelsChair Body
Cut here along corner
Back wall
of tray
Packaging
materials
Arm panel
storage location
Top of box
Lift upwards
Register now to take full advantage of your
four year limited warranty at:
www.kyotamassagechairs.com/Warranty
Full owners manual
available at:
www.kyotamassagechairs.com/Manual
For additional assistance
visit our website at:
www.kyotamassagechairs.com
Or call: 1-800-242-0761
Warranty
Card
Quick Start
Guide
E330 Kofuko
Massage Chair
Assembly Guide
E330 Kofuko
Massage Chair
E330 Kofuko
Massage Chair
User Manual
The World’s Most
Advanced Massage Chairs
The World’s Most
Advanced Massage Chairs
®

KYOTA Kofuko E330 Specifications

General

Brand	KYOTA
Model	Kofuko E330
Category	Massager
Language	English

Summary

E330 Kofuko Massage Chair Assembly Guide

Step 1: Check Box Contents

Verify all components are present before starting assembly. Contact support if any items are missing.

Step 2: Open the Box

Lift the top of the shipping box upwards to access the contents.

Step 3: Remove Packaging Materials

Clear away packaging, locate arm panels, and remove protective coverings from the chair.

Step 4: Prepare for Moving

Cut cardboard tray panels at the chair's back to create a runway for easier transport.

Step 5: Tip Chair Onto Wheels

Lean the chair back to rest on its base wheels for maneuvering.

Step 6: Position Arm Panels

Remove protective covering and place arm panels on correct sides, front lip facing forward.

Step 7: Attach Arm Panels

Align arm panel connectors with chair body sockets and push firmly to secure.

Step 8: Connect Power

Plug the power cord into a grounded outlet and the chair, then switch on the main power.

Step 9: Prepare Remote

Remove plastic from the remote, place it in the holder, power on, and select AUTO.

Final Check and Registration

Review operation, contact support if needed, and register your product for warranty.