72 Stard Road, Seabrook, NH 03874 | (800)-242-0761 | www.kyotamassagechairs.com
Version 2.0
M680 Kaizen 3D/4D
Massage Chair
Review chair for smooth operation. If things are not operating
correctly, review all assembly steps. Call Kyota support at
800-242-0761 if you need live US-based support.
You are done; time for a Massage!
Power on the
remote and select
AUTO program to
start a session.
SCAN CODE
Register your product at www.kyotamassagechairs.com/
warranty/registration to ensure it is in our system.
This will simplify the warranty process should you ever need it.
Alternatively, scan the QR code to go directly to the URL above.
SCAN CODE
Before assembling your chair, watch an assembly video at:
www.kyotamassagechairs.com/assembly-tutorials
Alternatively, scan the QR code to go directly to the URL above.
Assembly Guide
Advanced Massage Chairs
Advanced Massage Chairs
2
Step 2:
Plug power cord into power
port located on the back
side of the base of the chair.
Connect the chair power
cord to a grounded 110V
electrical outlet. Flip the
main power switch to on,
this will upright the chair out
of shipping position. Once
the chair is fully upright, flip
the power switch to off and
remove the power cord.
Step 3:
Place the footrest in front of the
chair body. Using the provided
M8 Hex Key, remove the 2 bolts
and their washers from either
side of the front of the chair
body and set them to the side.
3
Step 4:
Locate the chair body base
rod in the footwell of the
chair. Remove the metal clip
from the end of the base rod
pin and then remove the pin.
Place the base rod pin, metal
clip, and washer to the side.
Align the holes on the lifting
rod on the backside of the
footrest to the chair body
base rod and insert the base
rod pin. Place washer on end
of the base rod pin, then
insert the metal clip to secure.
4
1
Step 1:
Prior to assembly, carefully unpack all box contents. Carefully check box
contents to the detail below. Make sure all contents are accounted for.
If anything is missing, please contact Kyota Massage Chairs at
800-242-0761. Do not return to the place of purchase.
Accessory Box
Box 1: Chair Body & Accessory Box
M8x35
(10pcs)
M6x20
(5pcs)
M5x20
(5pcs)
M6 Hex Key with
Phillips Head End
M8 Hex Key,
M6 Hex Key
Feet Pads
Back Pad
Hood
Back Cover
Chair Body
Accessory Box
Seat Cushion
Connector
Beam
Power
Cord
Remote
Control
Box 3:
Footrest (1)
Box 2:
Arm Panels (2)
M680 Kaizen 3D/4D
Massage Chair
User Manual
Quick Start
Guide
M680 Kaizen 3D/4D
Massage Chair
Assembly Guide
M680 Kaizen 3D/4D
Massage Chair
Register now to take full advantage of your
four year limited warranty at:
www.kyotamassagechairs.com/Warranty
Full owners manual
available at:
www.kyotamassagechairs.com/Manual
For additional assistance
visit our website at:
www.kyotamassagechairs.com
Or call: 1-800-242-0761
Warranty
Card
Main Power Switch
Power Cord
Port
Footrest
Lifting Rod
Chair Body
Base Rod
Base Rod Pin
Footrest
Lifting Rod
Metal Clip
Chair Body
Base Rod
Washer
Footrest
Lifting Rod
Chair Top View
Chair Body
Base Rod
Step 15:
Position the back cover so that
the ball and socket fasteners
are aligned, then press into
place until you feel a snap to
secure. Insert M5x20 screws
into the four screw holes.
Tighten with the phillips head
end of the M6 hex key.
15
Step 17:
Connect the chair power cord to a grounded 110V electrical outlet and
plug it into the respective port on the back side of the base of the
chair (see step 2). Flip the main power switch to on.
17
Step 16:
Plug the remote control cord into the remote
control port located under the right side of
the seat cushion. Ensure the arrows on the
top of the remote control cord and the
remote control port are aligned before
connecting. Screw on to fasten. Do not force.
16
Ball and Socket
Fasteners x4
M5x20 Screw
Back Cover
Screw Holes
Remote Control
Remote Control
Cord/Port Connection
Footrest Bolt
To Next Page
Need help?
General