Bowl
Locking & unlocking the bowl
The mixing bowl sits onto the locking plate by inserting all three metal knobs into holes
cut out in the plate. Turn the plate to lock or unlock the mixing bowl - the directions are shown by
arrows on the plate. If the locking/unlocking is hard to do by hand, use the supplied tool to
help ease the locking/unlocking.
Open/close the mixer head
The tilt head has a handle in front, pull the handle to unlock the head and use the top handle to
lift it up. If the handle is hard to pull out then apply a little downward pressure on the top while
pulling the handle.
To lock the head down apply downward pressure on the head until you feel and hear the head is
rmly locked in place.
To Next Page
Loading...
