Bowl
Prepare the ingrediens in the bowl and lock the bowl in place, close and lock the
head rmly. Then close the safety grid and turn on the mixer by twisting the stop button
clockwise.
After a few seconds the display on the controller knob turn on. Twist it clockwise to start
mixing, the speed starts on level 1 and you can increase it up to level 9, to reduce the speed
twist the knob anticlockwise. The temperature of the dough is measured continuosly and
is shown in the middle of the display.
To use the timer function gently press the middle of the display, and the minute/seconds
will blink in the display, turn the knob to select the time required, and press the display
again to exit time setting. The mixer will beep and stop when the time has expired.
If you lift the safety grid under operation to add ingridients the mixer will stop, and a red
HUD symbol shows on the display. After closing the safety grid the machine gives a beep
and the HUD symbol dissapears. To start mixing again you turn the knob back to the
desired speed.
To immediatly stop or turn o the mixer press the STOP button.
Always unplug the power cord after use or when cleaning the machine.
To Next Page
Loading...
