Need help?Do you have a question about the L.A. Spas IN-FIT and is the answer not in the manual?
Details requirements for spa foundation, including concrete thickness and levelness.
Covers electrical safety, wiring, and connection standards for spa installation.
Procedure to remove air from pumps and ensure water flow before operation.
Importance of maintaining proper water chemistry for spa safety and longevity.
Steps for filling the spa and adjusting initial water balance.
Explains pH levels, their importance, and how to adjust them.
Details total alkalinity, its effect on pH, and ideal ranges.
Importance of sanitizers for preventing bacteria growth.
Guidance on maintaining bromine levels and using brominating tablets.
Guidance on maintaining chlorine levels and using granular dichlor.
Recommends shock treatment for oxidizing wastes and reducing chloramines/bromamines.
Recommends regular spa water testing with kits or strips.
Addresses issues like spa not heating, heating too warm, or erratic temperatures.
Covers problems like pulsating jets, no jet action, or poor jet performance.
Resolves issues like spa not turning on, turning on by itself, lights out, or pumps shutting down.
Explains common spa error messages and their corrective actions.
Provides further explanations for spa error codes and troubleshooting.
To Next Page
General