To Next PageTo Next Page
Need help?Do you have a question about the L-Acoustics 12XTi and is the answer not in the manual?
General| Impedance | 8 ohms |
|---|---|
| Connectors | 2 x NL4 |
| Type | 2-way loudspeaker |
| Frequency Response | 55 Hz - 20 kHz |
| Drivers | LF: 12", HF: |
| Compression Driver | 1.4" exit |
| Coverage angle | 90° |
| Enclosure material | Baltic birch plywood |
| Transducers | LF: 12" |
Explains the meaning of warning, caution, and important symbols used in the manual.
Lists critical safety guidelines for users to follow to prevent harm or damage.
Declares the product's conformity with EU directives and applied standards.
A welcome message and overview of the manual's purpose.
Instructions for safely opening the product packaging and checking for damage.
Details various mounting options including wall, ceiling, pole mounting, and stacking.
Explains how to connect the 12XTi enclosures to L-ACOUSTICS® LA4 / LA4X amplified controllers.
Guidance on choosing and configuring system setups based on electro-acoustic studies.
Using the 12XTi in standalone configurations within their nominal bandwidth (55 Hz - 20 kHz).
Using the 12XTi high-pass filtered at 100 Hz with SB18i subwoofers.
Connecting 12XTi and SB18i enclosures to the same LA4 controller for extended low-frequency.
Information on the product's design for demanding conditions and the need for regular inspection.
Outlines the steps for testing the acoustic behavior and mechanical integrity of the enclosure.
Procedures for servicing or replacing LF loudspeakers and HF diaphragms.
Lists available spare parts and essential tools for maintenance and repair.
