Need help?Do you have a question about the L-Acoustics Syva and is the answer not in the manual?
General| Horizontal Coverage | 140° |
|---|---|
| Vertical Coverage | 26° (+5/-21°) |
| Nominal Impedance | 8 Ω |
| Connectors | 2 x NL4 Speakon connectors |
| Enclosure Material | Baltic birch plywood |
| Components | 6 x 5" MF, 3 x 1.75" HF |
Description of the Syva Colinear Source system and its features.
Guidance on how to effectively use the owner's manual.
Information on the Syva, Syva Low, and Syva Sub enclosures.
Details on amplified controllers used with the Syva system.
Description of the LA-RAK II AVB touring rack.
Overview of various SpeakON and CA-COM cables for system connection.
Introduction to rigging accessories for Syva system deployment.
Explanation of the Syva's horizontal and vertical directivity patterns.
Details of the available presets for the Syva system.
Information on the various connectors used on the Syva system.
Description of the Syva's rigging points and stacking capabilities.
Rigging features of Syva Low and Syva Sub for ground-stacking.
Detailed description of individual rigging accessories.
Safety considerations for flown Syva configurations.
Safety recommendations for ground-stacked and pole-mounted setups.
Description of the standalone Syva system configuration.
Configuration of Syva with Syva Low for extended low-frequency response.
Configuration of Syva with Syva Low and Syva Sub for full-range sound.
General guidelines for performing preventive maintenance.
Detailed inspection procedure for rigging components.
Overview of critical parts for mechanical inspection.
Inspection points for wall-mounted Syva systems.
Inspection points for flown Syva systems.
Inspection points for pole-mounted Syva systems.
Inspection points for stacked Syva systems.
Reference pictures and details for inspection.
Measuring loudspeaker impedance to detect circuit continuity issues.
Performing listening tests to detect sound quality degradation.
Detailed procedure for mounting Syva on a wall.
Detailed procedure for flying the Syva system.
Detailed procedure for pole-mounting the Syva system.
Detailed procedure for stacking Syva on Syva Low.
Procedure for fitting a truss clamp onto Syva Wall.
Instructions for storing Syva Low/Sub in their protective covers.
Maximum number of enclosures per amplified controller.
Cabling scheme for terminal block outputs on specific controllers.
Cabling scheme for terminal block outputs on LA2Xi BTL.
Cabling scheme for one-channel speakON outputs.
Disassembly and reassembly procedures for the Syva enclosure.
Disassembly and reassembly procedures for the Syva Low enclosure.
Disassembly and reassembly procedures for the Syva Sub enclosure.
Detailed specifications for the Syva enclosure.
Detailed specifications for the Syva Low enclosure.
Specifications for Syva and Syva Low in a hybrid configuration.
Detailed specifications for the Syva Sub enclosure.
Specifications for the Syva Wall mounting accessory.
Specifications for the Syva Base mounting accessory.
Specifications for the Syva Pole mounting accessory.
Specifications for the Syva Bar rigging accessory.
Importance of cable quality, resistance, and length.
To Next Page
