To Next PageTo Next Page
Need help?Do you have a question about the L-Acoustics KUDO and is the answer not in the manual?
General| Frequency Response | 50 Hz - 20 kHz |
|---|---|
| Type | Line Source |
| Usable bandwidth (-10 dB) | 40 Hz - 20 kHz |
| Max SPL | 140 dB |
| Power Handling | 800 W RMS |
| Nominal impedance | 8 ohms |
| Sensitivity | 99 dB |
| Connectors | 2 x NL4MP Speakon connectors |
| Rigging | Integrated rigging system |
| Enclosure Material | Birch plywood with polyurethane coating |
Explains symbols indicating potential risks of physical harm, product damage, or recommendations.
Lists critical safety instructions like reading the manual, heeding warnings, and following instructions.
Warns about high sound pressure levels and potential hearing damage from prolonged exposure.
Advises against operating the product near heat sources like radiators or other devices.
Warns against exposing the product to moisture for extended periods, which can cause irreversible damage.
Emphasizes inspecting all system components for defects before use and withdrawing defective parts.
Instructs not to place the product on unstable surfaces and to follow manufacturer's mounting instructions.
Lists conditions requiring immediate service, such as exposure to moisture or physical damage.
Stresses keeping the manual safe and its importance for product resale.
Thanks the user for purchasing the product and highlights the manual's purpose for safe installation and operation.
Provides instructions on carefully opening cartons, checking for damage, and notifying the shipper if damaged.
Explains how to secure the KUDO® enclosure using the KPLA-2 dolly board and KCOV cover.
Details the K-LOUVER modular directivity technology and its four coverage pattern settings.
Describes the KUDO®'s four-point rigging system for stacking or flying arrays and refers to a separate manual.
Explains how to connect KUDO® enclosures to the LA8 amplified controller using specific cables.
Discusses system configuration choice, operation modes (FULL RANGE, HIGH-PASS), and presets.
Details the "FULL RANGE" mode, its frequency response, and its use as a standalone system.
Explains how to connect KUDO® enclosures to the LA8 controller in parallel, noting limits.
Describes the [KUDO** 25/40] presets, their high-pass filters, and equalization for K-LOUVER settings.
Details the "HIGH-PASS" mode, its use with subwoofers, and recommendations for ratios.
Explains connecting KUDO® to LA8 in parallel for "HIGH-PASS" mode, similar to "FULL RANGE".
Describes the [KUDO** 60] presets, their high-pass filters, and equalization for K-LOUVER settings.
Lists the high-grade components of the KUDO® and the importance of regular inspection.
Outlines the three steps for testing the product's acoustic behavior, mechanical assembly, and external aspect.
Describes how to test acoustic behavior using a sweep frequency generator and what to check for.
Details checking screws, PA-COM® sockets, and mobile parts for integrity and proper function.
Advises on cleaning the front fabric and repainting the cabinet, with precautions for the fabric.
Provides detailed procedures for removing and installing the LF loudspeaker, including recone kits.
Provides detailed procedures for removing and installing the MF loudspeaker.
Provides detailed procedures for removing and installing the HF driver or diaphragm.
States the weight of the KUDO® enclosure.
Lists optional shipping accessories like the KPLA-2 dolly board and KCOV protective cover.
Details certification for flying vertical arrays using KBUMP rigging, including inter-element angles.
Details certification for flying horizontal arrays using KLIFT rigging, including inter-element angles.
Details certification for stacking vertical arrays using KBUMP and KJACK rigging, including inter-element angles.
Describes the material, finish, front grill, rigging, and handles of the KUDO® cabinet.
