Need help?Do you have a question about the L-Acoustics 12XT and is the answer not in the manual?
General| Usable bandwidth (-10 dB) | 55 Hz - 20 kHz |
|---|---|
| Nominal Impedance | 8 ohms |
| Power | 400 W RMS |
| Coverage | 90° x 60° (H x V) |
| Transducers | 1 x 12" LF, 1 x 1.5" HF |
| LF Driver | 12'' cone driver |
| Connectors | 2 x NL4 |
| Weight (without rigging) | 26 kg (57.3 lbs) |
| Weight | 20 kg |
| Dimensions | 600 x 400 x 400 mm |
| Rigging | Integrated rigging points |
| Type | 2-way passive |
| Coverage angle | 90° x 60° (H x V) |
| Dimensions (H x W x D) | 600 x 400 x 400 mm |
Defines warning, caution, and important symbols for potential risks.
Provides essential safety guidelines for operation, sound levels, and environments.
Thanks the user for purchasing and outlines manual's purpose and content.
Instructs on carefully opening the carton and checking for shipping damage.
Describes various mounting options like wall, ceiling, flying, and stacking.
Explains how to connect the 12XT enclosures to the LA4 amplified controller.
Discusses system configuration options and factory presets for operation modes.
Details the operation of the PASSIVE 12XT in different modes (FULL RANGE, HIGH-PASS, HYBRID).
Explains the PASSIVE 12XT operation in standalone mode without low frequency extension.
Describes PASSIVE 12XT operation with a 100 Hz high-pass filter for subwoofer coupling.
Details PASSIVE 12XT operation combined with SB118 subwoofers for extended bandwidth.
Details the operation of the ACTIVE 12XT in different modes (FULL RANGE, HIGH-PASS).
Explains the ACTIVE 12XT operation in standalone mode without low frequency extension.
Describes ACTIVE 12XT operation with a 100 Hz high-pass filter for subwoofer coupling.
Provides information on the product's components and the need for inspection.
Outlines the steps for testing acoustic behavior, mechanical assembly, and external aspect.
Details how to test the acoustic performance using a sweep frequency generator.
Explains how to inspect screws, sockets, and rigging elements for integrity.
Provides instructions for cleaning and maintaining the external appearance of the enclosure.
Guides on replacing transducers (LF, HF) and the active/passive switch.
Provides procedures for removing and replacing the 12" LF loudspeaker.
Guides on removing and replacing the HF diaphragm.
Details the procedure for removing and replacing the active/passive switch.
Lists available spare parts and recommended tools for service.
To Next Page
