L-Acoustics LA4 - Introduction

Introduction
Introduction
The L-Acoustics amplied controllers are delivered with onboard rmware and preset library.
Presets of the onboard library can be loaded from the front panel of the amplied controller, or from the
LANetworkManager software application, a management tool dedicated to the remote control and monitoring of a
network of L-Acoustics amplied controllers.
LA Network Manager must be used for updating rmware on L-Acoustics amplied controllers. An up-to-date preset
library is automatically installed with the rmware. Check the L-Acoustics website for the latest version of software,
rmware and libraries.
Operating L-Acoustics amplied controllers
Refer to the LA2Xi, LA4, LA4X, LA8, LA12X, LA-RAK, LA-RAK II, and LA-RAK II AVB owner's manuals.
Installing LA Network Manager
Download the latest release pack from the L-Acoustics website and refer to the LA NWM Installation technical
bulletin.
Updating rmware on an L-Acoustics amplied controller
Refer to the LA Network Manager help, accessible from the Help menu of the software.
This version of the preset guide describes the LA2Xi, LA4, LA4X, LA8 and LA12X preset libraries version 6.6(.2).
Symbols
The following symbols are used in this document:
This symbol indicates a potential risk of harm to an individual or damage to the product.
It can also notify the user about instructions that must be strictly followed to ensure safe installation or operation of
the product.
This symbol noties the user about instructions that must be strictly followed to ensure proper installation or
operation of the product.
This symbol noties the user about complementary information or optional instructions.
Do not open unless authorized.
This symbol indicates the presence of electrical shock hazards.
It also indicates that no maintenance performed by the end user requires access to internal components.
Preset Guide owner's manual (EN) version 16.0 5