Need help?Do you have a question about the L-Acoustics LA48A and is the answer not in the manual?
General| Amplifier Technology | Class D |
|---|---|
| Number of Channels | 4 |
| Power Output (8 Ohms) | 1200 W |
| Power Output (4 Ohms) | 2400 W |
| Power Output | 4800 W |
| Gain | 32 dB |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Input Connectors | XLR |
| Output Connectors | Speakon |
| THD+N | < 0.1% |
| S/N Ratio | > 100 dB |
| Input Impedance | 20 kΩ |
| Dimensions (H x W x D) | 88 x 483 x 360 mm |
| Cooling | Variable speed fan |
| Frequency Response | 20Hz - 20kHz (+0/-1dB) |
Crucial guidelines for safe amplifier operation, including handling, connections, and environment.
Advises on preventing loudspeaker damage from overpowering or misuse.
Warns about hazardous output voltages and touching exposed speaker wiring.
Explains power/impedance matching for various loads and MLS settings.
Details how the clip limiter prevents loudspeaker damage from clipped signals.
Specifies AC voltage requirements and wiring for the amplifier.
Describes independent channel operation and recommended impedance.
Details how to configure the amplifier for bridged mono operation.
Warns against terminal connection issues and emphasizes speaker polarity.
Details how the clip limiter prevents loudspeaker damage from clipped signals.
Explains thermal protection and VHF signal muting.
Describes the amplifier's short circuit protection circuitry.
Explains the AFS limiter and its indication on the front panel.
Details automatic shutdown for over/under voltage conditions.
Describes the AC indicator LED and DC protection mechanisms.
Provides checks for common issues like no output, thermal protection, or power indicators off.
To Next Page
