L-TEK Dance Base MINI User Manual

Dance Base MINI
#1
#2
#3
#4
HOLD BUTTON TO PAIR YOUR PAD
STATUS
BEAT/
Function 1:
Pairing new device with the Base MINI
Enabling the pairing function is possible
within up to 30 seconds after powering up the
Base MINI.
Pairing a device is made by holding one of the
4 buttons for at least 2 seconds - depending
on which devices you want to assign / pair.
After starting the pairing function, the LED
assigned to this channel (button) ashes
Within 30 seconds, turn on the Dance Pad
with buttons 3 and 4 pressed at the same time
- Arrows Up and Down on the DDR mat.
Completion of the pairing process will be
signaled by three ashes of all LEDs on the
Base MINI controller and lighting of the green
LED on the Dance Pat.
The controller and the mat are ready to work
immediately after the pairing process is
completed (device restart is not required)

L-TEK Dance Base MINI Specifications

General

Brand	L-TEK
Model	Dance Base MINI
Category	Controller
Language	English