L3Harris narda PMM EP-602

To Next Page

NARDA

Safety

Test

Solutions

S.r.l. Socio Unico

Sales & Support:

Via Rimini, 22

20142 - Milano (MI)

Tel.: +39 02 581881

Fax: +39 02 58188273

Manufacturing Plant:

Via Benessea, 29/B

17035 - Cisano sul Neva (SV)

Tel.: +39 0182 58641

Fax: +39 0182 586400

http://www.narda-sts.it

SERIAL NUMBER OF THE INSTRUMENT

You can find the Serial Number on the fiber optic holder of the instrument.

The Serial Number is in the form: 000XY00000.

The first three digits and the two letters are the Serial Number prefix, the last five

digits are the Serial Number suffix. The prefix is the same for identical instruments,

it changes only when a configuration change is made to the instrument.

The suffix is different for each instrument

User’s Manual

PMM EP-600

ELECTRIC FIELD PROBE

100 kHz ÷ 9.25 GHz

PMM EP-601

ELECTRIC FIELD PROBE

10 kHz ÷ 9.25 GHz

PMM EP-602

ELECTRIC FIELD PROBE

5 kHz ÷ 9.25 GHz

PMM EP-603

ELECTRIC FIELD PROBE

300 kHz ÷ 18 GHz

PMM EP-604

ELECTRIC FIELD PROBE

300 kHz ÷ 26.5 GHz

Need help?

Do you have a question about the L3Harris narda PMM EP-602 and is the answer not in the manual?

Summary

General Information

Diode-based Isotropic Electric Field Probes

Explains the technology and functionality of diode-based isotropic electric field probes.

Specifications EP-600

Lists detailed technical specifications for the PMM EP-600 electric field probe.

EP-600 Typical Frequency Response

Specifications EP-601

Lists detailed technical specifications for the PMM EP-601 electric field probe.

EP-601 Typical Frequency Response

Specifications EP-602

Lists detailed technical specifications for the PMM EP-602 electric field probe.

EP-602 Typical Frequency Response

Specifications EP-603

Lists detailed technical specifications for the PMM EP-603 electric field probe.

EP-603 Typical Frequency Response

EP-603 Typical Anisotropy

Specifications EP-604

Lists detailed technical specifications for the PMM EP-604 electric field probe.

EP-604 Typical Frequency Response

Battery Management

Operation

Probe Support

Coupling between Conductive Surfaces

RS232 Connection

Details the procedure for establishing an RS232 connection between the probe and PC.

USB Connection

Explains how to connect the probe to a PC using a USB-RS232 adapter and drivers.

Installation on Conical Holder

Installation on Tripod TR-02

Measurements

Spurious Signals

General Requirements

Measurement Procedures

Guidelines to minimize risks, errors, interferences, and damages during measurement procedures.

Preventing Measurement Errors

PMM EP-600;601;602;603;604 Operation

Details on operating the PMM EP probes, including power, switching, and auto-off features.

Applications

Operating with 8053 B (Option)

Instructions for connecting and operating the EP probes with the PMM 8053B meter.

Operating with PMM SB10 (Option)

Information on controlling multiple EP probes simultaneously using the PMM SB10.

WinEP600 and SetAddEP600 Operating Instructions

Installation

Guide for installing the WinEP600 software and SetAddEP600 utility on a PC.

Running WinEP600 Software

Instructions on how to start and run the WinEP600 software application.

Main Window Contents

Main Window Displayed Measurements

Frequency Correction Setting

Reading Rate Setting

XYZ; TOT

Save Meas

Plot

HOLD; RUN

Settings Menu

Preference

Running SetAddEP600 Utility

Guide for running the SetAddEP600 utility to configure EP probes, including COM port assignment.

Main Window

Probe Data

New Address

Uninstalling WinEP600 and SetAddEP600

Uninstalling the Driver of RS232-USB Adapter

Communication Protocol

Protocol

Details the serial communication protocol (RS232/USB) and command structure for EP probes.

DLL Function Reference Guide

C Language Functions

Describes C language functions for controlling the PMM EP probes via DLL.

Visual Basic Functions

Guidance on referencing the PMM_EP60X.tlb type library in Visual Basic projects.

Status Code Reference

Table listing status codes and their meanings for DLL function return values.

Accessories

PMM 8053-OC Optical-Serial Converter

Describes the PMM 8053-OC for connecting fiber optics to a PC's serial port.

8053-OC-PS Power Supply

Explains the 8053-OC-PS power supply for cases where PC serial port power is insufficient.

PMM TR-02 A Tripod

Details the PMM TR-02A tripod for supporting EP probes and the PMM 8053B unit.

PMM TT-01 Telescopic Extension

Describes the TT-01 telescopic extension for increasing the distance between probe and operator.

PMM SB-10 Switching Control Box

Information on the PMM SB-10 for controlling multiple field probes simultaneously.