L3Harris narda PMM EP-604 - User Manual

NARDA
Safety
Test
Solutions
S.r.l. Socio Unico
Sales & Support:
Via Rimini, 22
20142 - Milano (MI)
Tel.: +39 02 581881
Fax: +39 02 58188273
Manufacturing Plant:
Via Benessea, 29/B
17035 - Cisano sul Neva (SV)
Tel.: +39 0182 58641
Fax: +39 0182 586400
http://www.narda-sts.it
SERIAL NUMBER OF THE INSTRUMENT
You can find the Serial Number on the fiber optic holder of the instrument.
The Serial Number is in the form: 000XY00000.
The first three digits and the two letters are the Serial Number prefix, the last five
digits are the Serial Number suffix. The prefix is the same for identical instruments,
it changes only when a configuration change is made to the instrument.
The suffix is different for each instrument
Document EP60XEN-01122-3.16 – Copyright © NARDA 2020
User’s Manual
PMM EP-600
ELECTRIC FIELD PROBE
100 kHz ÷ 9.25 GHz
PMM EP-601
ELECTRIC FIELD PROBE
10 kHz ÷ 9.25 GHz
PMM EP-602
ELECTRIC FIELD PROBE
5 kHz ÷ 9.25 GHz
PMM EP-603
ELECTRIC FIELD PROBE
300 kHz ÷ 18 GHz
PMM EP-604
ELECTRIC FIELD PROBE
300 kHz ÷ 26.5 GHz

Summary

Safety Information

Electrical and Safety Symbols

Explains electrical safety symbols used in the manual.

Document Symbols Explanation

Defines symbols and their meaning within the document.

Safety Recommendations and Instructions

General Safety Guidelines

Provides essential safety recommendations for using the product.

1 General

1.4 Specifications EP-600

Lists detailed technical specifications for the EP-600 probe.

1.5 Typical frequency response EP-600

Shows the EP-600's frequency response graph (correction OFF).

1.6 Specifications EP-601

Lists detailed technical specifications for the EP-601 probe.

1.7 Typical frequency response EP-601

Shows the EP-601's frequency response graph (correction OFF).

1.8 Specifications EP-602

Lists detailed technical specifications for the EP-602 probe.

1.9 Typical frequency response EP-602

Shows the EP-602's frequency response graph (correction OFF).

1.10 Specifications EP-603

Lists detailed technical specifications for the EP-603 probe.

1.11 Typical frequency response EP-603

Shows the EP-603's frequency response graph (correction OFF).

1.12 Typical anisotropicity EP-603

1.14 Specifications EP-604

Lists detailed technical specifications for the EP-604 probe.

1.15 Typical frequency response EP-604

Shows the EP-604's frequency response graph (correction OFF).

1.17 Battery management

2 Operation

2.1 Inspection

2.3 Return for service

2.5 Probe support

2.6 Coupling between probe and conductive surfaces

2.9 Connecting EP-600;601;602;603;604

General guide on connecting the probes to a PC.

2.9.1 RS232 Connection

Specific steps for establishing an RS232 connection.

2.9.2 USB Connection

Specific steps for establishing a USB connection.

2.10 EP-600;601;602;603;604 installation

Instructions for installing the probes.

2.10.1 EP-600;601;602;603;604 installation on the conical holder

Details how to mount the probe onto the conical holder.

2.10.1.1 EP-600;601;602;603;604 removal from the conical holder

2.10.2 EP-600;601;602;603;604 installation on tripod PMM TR-02

3 Measurements

3.2 Preliminary

Steps to determine source characteristics before measurement.

3.2.1 Spurious signals

3.3 General requirements

3.4 Basic functional checks

3.5 Measurement procedures

Guidelines to minimize risks and errors during measurements.

3.6 Preventing measurement errors

Methods to avoid factors that can influence measurement accuracy.

3.7 PMM EP-600;601;602;603;604 operation

How to operate the EP-600/601/602/603/604 field probes.

3.8 Applications

Discusses various applications for the field probes.

3.8.1 EMC

3.9 Operating PMM EP-600;601;602;603;604 with 8053 B (Option)

Instructions for using the probes with the PMM 8053B meter.

3.10 Operating EP-600;601;602;603;604 with PMM SB10 (Option)

Guide to operating probes with the PMM SB10 control box.

4 Battery charger EP600 CHARGER

4.3 EP600 CHARGER

4.3.1 Specifications

Technical specifications of the EP600 CHARGER.

4.4 Installing EP-600;601;EP602;603;604 on EP600 CHARGER

Step-by-step guide for installing probes onto the charger.

5 WinEP600 and SetAddEP600 Operating instructions

5.3 Installation

Detailed instructions for installing the WinEP600 and SetAddEP600 software.

5.4 Running WinEP600 software

Guide on how to launch and start using the WinEP600 software.

5.5 WinEP600 Main Window Features

Overview of the WinEP600 software's main interface elements.

5.5.2 Displayed Measurements

Explains how measurements are displayed and the available modes.

5.5.3 Frequency Correction Setting

How to set the frequency for measurement correction.

5.5.4 Reading Rate Setting

5.5.5 XYZ; TOT Mode Selection

5.5.6 Saving Measurements

5.5.7 Plotting Data

5.5.8 HOLD; RUN Control

5.5.10 Settings and Preferences Menu

5.5.10.1 Filter and Average Settings

5.5.10.2 UI and Plot Preferences

5.6 Running SetAddEP600 Utility

Instructions for configuring the SetAddEP600 utility.

5.7 SetAddEP600 Main Window

5.7.2 Probe Data Display

5.7.3 Setting New Probe Address

5.8 Uninstalling Software

6 Communication protocol

6.2 Protocol

Details the serial communication protocol specifications (RS232/USB).

7 DLL Function reference guide

7.1 C language

7.1.1 PMM_CreateProbe()

7.1.2 PMM_RemoveProbe()

7.1.3 PMM_Firmware()

7.1.4 PMM_ProbeName()

7.1.5 PMM_Model()

7.1.6 PMM_CalibrationDate()

7.1.7 PMM_ReadBattery()

7.1.8 PMM_ReadTemperature()

7.1.9 PMM_SerialNumber()

7.1.10 PMM_SetFrequency()

7.1.11 PMM_SetFilter()

7.1.12 PMM_SetTimeout()

7.1.13 PMM_SetAutoOffTime()

7.1.14 PMM_ReadTotalField()

7.1.15 PMM_ReadAxisField

7.3 Status Code

L3Harris narda PMM EP-604 Specifications

General

Probe Type	Isotropic
Storage Temperature	-20 °C to +60 °C
Frequency Range	100 kHz to 60 GHz
Measurement Range	0.2 V/m to 1000 V/m
Typical Isotropy	±0.5 dB
Display	N/A (Requires external meter/analyzer)