What to do if zeroize failed on L3Harris Radio?
If the zeroize process failed on your L3Harris Radio, it could be due to a radio problem. Power cycle the radio. If the problem persists, contact L3Harris.
What to do if pairing failed on L3Harris Radio?
If the Bluetooth pairing fails on your L3Harris Radio, ensure that the device you are trying to pair with is discoverable. Then, attempt to re-pair the device.
What does 'INVALID RX FREQUENCY' mean on L3Harris Radio?
If you see an 'INVALID RX FREQUENCY' error on your L3Harris Radio, ensure that the entered Rx frequency follows the band spacing rules.
What does 'INVALID TX FREQUENCY' mean on L3Harris Radio?
If you receive an 'INVALID TX FREQUENCY' error on your L3Harris Radio, make sure that the entered Tx frequency follows the band spacing rules.
What to do if install failed on L3Harris Radio?
If the installation failed on your L3Harris Radio because of an error during the install process, transfer the file again and reattempt the installation. If the problem persists, contact L3Harris.
What to do if install failed because extraction of compressed file failed on L3Harris Radio?
If the installation failed on your L3Harris Radio because the extraction of the compressed file failed, transfer the file again and reattempt the installation. If the problem persists, contact L3Harris.
What to do if edit failed on L3Harris Radio?
If the edit failed on your L3Harris Radio because you are unable to modify a P25 Channel, power cycle the radio and try again. If the problem persists, contact L3Harris.
What to do if install failed because removal of existing SW failed on L3Harris Radio?
If the installation failed on your L3Harris Radio because the removal of existing SW failed, attempt the installation again. If the problem persists, contact L3Harris.
What does 'INVALID KEYSTORE ZEROIZE NEEDED' mean on L3Harris Radio?
If you see an 'INVALID KEYSTORE ZEROIZE NEEDED' message on your L3Harris Radio, it indicates a corrupt key database or incorrect database configuration. Zeroize the database to resolve this issue.
What to do if mission plan activation failed on L3Harris Radio?
To address a failed mission plan activation on your L3Harris Radio, use RPM2 to ensure the plan's validity. If failures persist, contact L3Harris.
Explains conventions used for safety precautions in the manual.
Information on RF energy awareness and control for occupational use.
Radio's compliance with national and international RF exposure standards.
Identifies common hazards associated with mobile radio operation.
Rules and regulations for operating two-way radio systems.
Provides an overview of the XL Series Mobile Radio's capabilities.
Describes the Vehicle Communications Hub as the main LMR radio unit.
Details the XL Control Head's features and connectivity.
Describes the features of the Keypad Mobile Microphone (KMM).
Identifies and explains the radio's controls.
Instructions for powering on the radio and adjusting volume.
Explains how to access and navigate the radio's menus.
How to transmit and receive group calls.
How to view and change radio personalities.
Details the noise suppression feature for clear voice quality.
How to enable or disable radio encryption.
Procedures for setting up scan lists, home, and priority channels.
How to use the web-based Device Management application.
Using RPM2 for radio programming via USB.
How to program the radio using Wi-Fi.
How to edit channel parameters on the radio.
Lists maritime frequencies per US Coast Guard.
Explains FCC mandated narrowbanding restrictions for radios.
Lists error messages, causes, and resolutions.
Information and workarounds for OTAR errors.
Overview of steps for programming a radio over Wi-Fi.
How to configure the wireless access point for programming.
How to configure the radio personality for Wi-Fi connection.
How to configure the RPM2 application for Wi-Fi programming.
Steps to create encryption keys using L3Harris Key Admin.
Procedures for loading encryption keys into the radio.
How to load UKEKS using Key Loader and RPM2.
How to load keys using Harris Key Loader.
How to load keys using a Motorola KVL device.
How to perform LLA Keyloading with a Motorola KVL.
Explains the Protected Keys feature for P25 Voice Keys.
To Next Page
General