Need help?Do you have a question about the La Crosse Technology 404-3942 and is the answer not in the manual?
This document describes the 16.5" Decorative Analog Wall Clock with Quiet Sweep Movement, model 404-3942, DC: 022817, manufactured by La Crosse Clock Co. This wall clock is designed to provide accurate timekeeping with a quiet sweep movement, making it suitable for various indoor environments where minimal noise is desired. The clock features a decorative design, making it not only a functional timepiece but also an aesthetic addition to your home or office decor.
To begin using your new clock, the first step is to install the necessary battery. Locate the battery compartment, which is typically found on the back of the clock's movement in the center. You will need one AA battery for operation. Carefully insert the AA battery into the compartment, ensuring that the positive (+) and negative (-) terminals are aligned correctly according to the markings inside the compartment. Incorrect battery insertion can prevent the clock from functioning.
Once the battery is installed, the next step is to set the correct time. On the back of the clock's movement, you will find a small time set wheel. Gently spin this wheel in either direction until the hour and minute hands display the current time. The quiet sweep movement means that the second hand will move continuously and smoothly, rather than in discrete ticks, contributing to a peaceful environment.
After setting the time, the clock is ready to be mounted on a wall. The clock is designed with a hanging hole on its back for easy installation. Choose a suitable location on your wall where the clock will be visible and secure. Use an appropriate wall anchor or hook to hang the clock securely. Once mounted, you can enjoy the accurate timekeeping and the quiet operation of your new decorative wall clock.
It is important to note that the quartz movement within the clock is designed for accurate timekeeping. However, if you observe that the clock is not operating, or if it consistently loses time, the most common cause is a depleted battery. In such cases, replacing the battery with a fresh one should resolve the issue and restore accurate timekeeping.
For ongoing care and maintenance of your clock, there are several key practices to ensure its longevity and continued performance. When replacing batteries, always make sure to purchase the correct size and grade of battery that is most suitable for the clock's intended use. This typically means using a standard AA battery. Before inserting a new battery, it is good practice to clean both the battery contacts within the device and the contacts on the battery itself. This helps ensure a good electrical connection and prevents issues caused by corrosion or dirt buildup.
Always double-check that the battery is installed with the correct polarity, meaning the positive (+) end aligns with the positive terminal and the negative (-) end aligns with the negative terminal in the battery compartment. Incorrect polarity can prevent the clock from working and may potentially damage the internal components.
If you plan to store the clock or not use it for an extended period, it is highly recommended to remove the battery from the compartment. Leaving batteries in a device for long periods, especially when not in use, can lead to battery leakage, which can corrode the battery contacts and damage the clock's movement. Similarly, once a battery has expired or is no longer providing sufficient power, it should be promptly removed from the clock to prevent potential leakage and damage. Following these simple maintenance steps will help ensure your decorative analog wall clock provides reliable and accurate time for many years to come.
General| Display | LCD |
|---|---|
| Alarm | Yes |
| Snooze Function | Yes |
| Backlight | Yes |
| Atomic Time Sync | Yes |
| Battery Backup | Yes |
| Time Format | 12/24-hour |
| Type | Atomic Digital Wall Clock |
| Power Source | Battery-powered |
| Batteries | 2 AA (not included) |
To Next Page