www.lacrosseclock/support
Instructions Manual:
404-2631
DC: 051916
Wall Clock with Temperature and Humidity
Setup
1. Insert 1 fresh AA, LR6 1.5 volt ALKALINE battery according to the
polarity markings. The battery is a snug fit.
2. Rotate the Time Set Wheel to set the time.
3. Mount on the wall and enjoy!
Note: The quartz movement will keep the clock running accurately. If the
clock does not operate, or steadily loses time, replace the battery.
Frequently Asked Questions
Q. Can the temperature/humidity be adjusted?
A. Temperature and Humidity will self-adjust. They cannot be calibrated.
Q. How long will the battery last?
A. A good AA alkaline battery will last over 12 months.
Q: Will this clock provide times around the world?
A: The time is set manually. The clock may be set for any time around
the world.
Q: Why do the hands spin?
A: Hands may spin if the battery is under powered or over powered. Use
only Alkaline batteries in the clock.
Compartment
Wheel
1. Accurate quartz movement
2. Fracture resistant lens
3. Metal hands
4. Temperature/humidity
5. Requires one (1) “AA”
battery (not included)